Our Commitment
Linx strives to make every engineer a hero in record time™ by minimizing the risk, delays and technical challenges for design engineers to implement wireless functionality and connectivity to the Internet. Unlike other module and RF component producers, every aspect of our product and design experience is specifically crafted to achieve Wireless Made Simple®. As part of this pledge Linx Technologies is committed to being a quality leader in RF products and services for the Internet of Things, making peoples lives better across a wide range of markets from Industrial to Consumer.
Quality by Design
Linx Technologies makes use of advanced engineering tools in order to design and develop products quickly and efficiently, with constant attention to strict quality standards by design. Using state of the art tools including CAD design, modeling, 3D printing and high level RF simulation tools, Linx strives to use best practices throughout the organization. It is just one way of showing prospective and current customers – as well as suppliers and business partners – how serious we are about quality in our products and services.
QMS and Documentation
Linx Technologies achieved ISO 9001:2008 certification in 2017 by DQS, Inc., and has since upgraded to ISO 9001:2015 certification by DQS, Inc. The Linx Quality and Management System is governed by a comprehensive Quality Assurance Manual and supporting procedures that encompasses the focus areas of the ISO 9001:2008 & ISO 9001:2015 quality management systems requirements.
RoHS Compliance, REACH and SVHC
Linx Technologies is committed to managing the use of chemical substances in accordance with governmental regulations, industry standards, and customer-specific requirements in order to protect the environment. This document certifies that the part numbers listed in this document and manufactured by Linx Technologies and Antenna Factor do not to the knowledge of the certifier contain the substances listed in the table below in concentrations exceeding the Maximum Control Value (MCV), and will be compliant as of the date listed.
| Substance | Maximum Control Value |
| Lead | 0.1% by weight (1000 ppm) (1) |
| Mercury | 0.01% by weight (100 ppm) |
| Cadmium | 0.01% by weight (100 ppm) (1) |
| Hexavalent Chromium | 0.1% by weight (1000 ppm) |
| Polybrominated Biphenyls (PBB) | 0.1% by weight (1000 ppm) |
| Polybrominated Diphenyl Ethers (PBDE) | 0.1% by weight (1000 ppm) |
| Bis(2-Ethylhexyl) phthalate (DEHP) | 0.1% by weight (1000 ppm) |
| Benzyl butyl phthalate (BBP) | 0.1% by weight (1000 ppm) |
| Dibutyl phthalate (DBP) | 0.1% by weight (1000 ppm) |
| Diisobutyl phthalate (DIBP) | 0.1% by weight (1000 ppm) |
(1) The MCV does not apply to applications for which exemptions have been granted to the RoHS Directive
Products containing the substances listed in the table above, in concentrations below the MCV, are understood to be in compliance with Directive 2015/863 of the European Parliament and of the Council of 22 July 2019 on the restriction of the use of certain hazardous substances in electrical and electronics equipment (RoHS Directive) in accordance with the definitions set forth in the directives.
The full document with listed products can be downloaded from this page. In addition, our REACH and SVHC Statement can be downloaded from this page.If you have any other questions regarding this important subject, please contact us at info@linxtechnologies.com.
Conflict Minerals Policy
Linx Technologies strives to source components and materials from companies that share our values with regard to ethics, human rights, and environmental responsibility. Linx Technologies is dedicated to sourcing minerals in a manner that respects these values.
Linx Technologies is works to comply to the Organization for Economic Co-operation and Development (OECD) guidance on conflict minerals and Section 1502 of the Dodd-Frank Acts.
If you wish to obtain our documentation regarding Conflict Minerals, our Electronic Industry Citizenship Coalition/Global e-Sustainability Initiative (EICC/GeSI) declarations, please contact us at info@linxtechnologies.com.
Suppliers to Linx Technologies are evaluated on their commitment to becoming conflict-free and to source only from conflict-free smelters. Each supplier to Linx Technologies is expected to provide completed Electronic Industry Citizenship Coalition/Global e-Sustainability Initiative (EICC/GeSI) declarations which include documenting countries of origin for their tin, tantalum, tungsten, and gold.
Available Documents and FAQ
Commonly requested documentation can be found here for download. For other items, please contact us at info@linxtechnologies.com.