nSP250 nanoSplatch™ Antennas

The nanoSplatch™ nSP250 is a surface-mount antenna for embedded WiFi/WLAN and other 2.4 GHz or 5 GHz ISM or U-NII frequency band applications. It uses a grounded-line technique to achieve outstanding performance in a tiny surface-mount package. The nSP250 exhibits low proximity effect with a very hemispherical radiation pattern, making it ideal for handheld devices and applications typically subject to interference.

 

The nSP250 is available in tape and reel packaging and is designed for reflow-solder mounting directly to a printed circuit board for high-volume applications.

Features

  • Ultra-compact package (9.6 mm x 8.4 mm x 1.1 mm)
  • Excellent performance with smallest ground plane (40 mm x 20 mm)
  • Resistant to proximity effect
  • Omnidirectional radiation pattern
  • Direct surface-mount PCB attachment
  • Reflow- or hand-solder assembly
  • High gain (2.7 dBi at 2.4 GHz, 3.7 dBi at 5.8 GHz)
  • High efficiency (66% at 2.4 GHz, 69% at 5.8 GHz)

Applications

  • Single- and dual-band WiFi/WLAN/802.11
  • Bluetooth® and ZigBee®
  • Smart Home networking
  • Sensing and remote monitoring
  • Hand-held devices
  • Internet of Things (IoT) devices
  • U-NII and ISM applications

 

nanoSplatch™ Antenna Evaluation Kits

Evaluate nanoSplatch antennas, or prototype designs with the nanoSplatch antenna evaluation kit. Antenna evaluation kits provide the opportunity to benchmark performance against the product datasheet and other offerings. Kits also enable testing of antenna performance under simulated interference conditions and provide a benchmark for comparison with product design prototypes. For even more support, contact Linx Technologies for a design consultation.

Features

  • Compact design for product development (31.6 mm x 40.6 mm)
  • High performance with small ground plane (40 mm x 20 mm)
  • Mounted antenna included
  • Surface mount pads for pi matching network
  • Includes zero-ohm resistor for bypassing matching network
  • U.FL/MHF plug (male) connector for cable attachments to test equipment or prototype (cable not included)
  • Cable tie-down holes (optional use)

Applications

  • Single- and dual-band WiFi/WLAN/802.11
  • Bluetooth® and ZigBee®
  • Smart Home networking
  • Sensing and remote monitoring
  • Hand-held devices
  • Internet of Things (IoT) devices
  • U-NII and ISM applications

 

RCS Series Reduced-Height Right-Angle Antennas

The reduced-height RCS Series is great for products that need a small antenna with a right-angle connector. It’s available at 315 MHz, 418 MHz, 433 MHz, 868 MHz, 916 MHz and 2.45 GHz. Each antenna has a weatherized jacket that protects it from damage in outdoor applications. An FCC Part 15 compliant RP-SMA connector attaches the antenna to the PCB. The 433 MHz, 868 MHz and 2.45 GHz model are also available with an SMA connector.

  • Compact: reduced-height package fits in small spaces
  • Durable: weatherized jacket protects the antenna from damage in outdoor applications
  • Replaceable: connectorized base makes field replacement easy
  • Customizable: custom colors and connectors are available

RCL Series Reduced-Height Right-Angle Antennas

The reduced-height RCL Series features a wide bandwidth and a right-angle connector. Its weatherized jacket protects the antenna from harsh weather conditions. Available at 868 MHz, 916 MHz and 2.4 GHz with SMA connectors, the 916 MHz and 2.4 GHz the antennas are also available with FCC Part 15 compliant RP-SMA connector.

  • Compact: reduced-height package fits in small spaces
  • Durable: weatherized jacket protects the antenna in outdoor applications
  • Replaceable: connectorized base makes field replacement easy
  • Customizable: custom colors and connectors are available

RCT Series Antennas

The sleek RCT Series features a weatherized jacket that protects the antenna from damage caused by rain, snow and other harsh weather conditions. Each antenna has a base that tilts 90° and rotates 360°, which makes it easy to reorient the antenna for better performance or fold it down for storage and shipment. The antenna is available at 2.45 GHz with an SMA or FCC Part 15 compliant RP-SMA connector.

  • Versatile: wide bandwidth is suitable for Bluetooth, 802.11, ZigBee and other RF protocols
  • Adjustable: articulating base lets you reorient the antenna for performance, storage and shipment
  • Durable: weatherized jacket protects the antenna from damage in outdoor applications
  • Replaceable: connectorized base makes field replacement easy
  • Customizable: custom colors and connectors are available

CT Series Antennas

The sleek CT Series features a weatherized jacket that protects the antenna from damage caused by rain, snow or other harsh weather conditions. The antenna is available at 2.45 GHz with an SMA or FCC Part 15 compliant RP-SMA connector.

  • Versatile: wide bandwidth is suitable for Bluetooth, 802.11, ZigBee and other RF standards
  • Durable: weatherized jacket protects the antenna in outdoor applications
  • Replaceable: connectorized base makes field replacement easy
  • Customizable: custom colors and connectors are available

PML Series Antennas

PML Series antennas are available at 868MHz, 916MHz and 2.4GHz. Each antenna has a base that tilts 180°, which makes it easy to reorient the antenna for better performance or fold it down for storage and shipment. It mounts through a hole in the product case and is secured with a nut or threaded fastener. A 12-inch (305mm) RG178 cable can be used to attach the antenna to a connector or PCB.

  • Adjustable: tilting base lets you reorient the antenna for performance, storage and shipment
  • Affordable: cable solders to the board; no need to purchase a connector
  • Secure: permanently attaches to the product case with a nut or threaded fastener
  • Customizable: custom colors, cables and connectors are available

HWR Series Antennas

The popular HWR Series is available at 315 MHz, 418 MHz, 433 MHz, 868 MHz, 916 MHz, 1.4 GHz and 2.4 GHz. Each antenna has a base that tilts 90° and rotates 360°, which makes it easy to reorient the antenna for better performance or fold it down for storage and shipment. The standard antenna is black with an SMA or FCC Part 15 compliant RP-SMA connector.

  • Consistent: package looks the same at different frequencies
  • Adjustable: articulating base lets you reorient the antenna for performance, storage and shipment
  • Replaceable: connectorized base makes field replacement easy
  • Customizable: custom cables and connectors are available

HW Series Antennas

The popular HW Series is available at 315 MHz, 418 MHz, 433 MHz, 868 MHz, 916 MHz, 1.4 GHz and 2.4 GHz. The antenna is black with an SMA or FCC Part 15 compliant RP-SMA connector.

  • Consistent: package looks the same at different frequencies
  • Replaceable: connectorized base makes field replacement easy
  • Customizable: custom colors and connectors are available

Tamper-Resistant Monopole WiFi WRT Antenna

Expanding the popular and proprietary Linx WRT line, the dual-band monopole WiFi WRT antenna supports legacy 2.4 GHz WiFi and newer 5.8 GHz band applications, in a single, compact antenna. The monopole WiFi WRT antenna has a low profile and tamper resistant design that is perfect for challenging applications such wireless vending, security, traffic, and power equipment. Compared to the WRT Series, the WRT-MON Series requires much less space inside the product case because it lacks an internal counterpoise. Installing through a small hole in the enclosure the monopole WiFi WRT antenna has an integrated closed-cell PSA seal, protecting critical equipment from harsh, external elements. The monopole version of the WRT is optimized for applications with conductive enclosures, using the enclosure material as the counterpoise eliminates the need for an additional ground plane.

Available at 2.45 GHz and dual-band 2.45 GHz/5.8 GHz, it’s attached to an 8.5-inch (216mm) long cable with an SMA, FCC Part 15 compliant RP-SMA or U.FL/MHF compatible connector on the other end. The RP-SMA and SMA models use an RG174 cable. The U.FL model uses a 1.32mm cable.

Key Benefits:

  • Tamper-resistant: difficult to break
  • Compact: takes up less space inside the product than the WRT Series dipole
  • Secure: permanently attaches to the product case with a nut or threaded fastener
  • Customizable: custom colors, cables and connectors are available

The Monopole WiFI WRT Antenna is also available as a dipole which can be found here.

Linx Technologies

159 Ort Lane
Merlin, OR, US 97532
Toll Free: 1-800-736-6677
Intl: 1-541-471-6256
Fax: 1-541-471-6251
info@linxtechnologies.com