Linx Technologies
  • Home
  • AntennasToggle Dropdown
    • Cellular
    • NB-IoT and LTE-M
    • Sub 1 GHz ISM and LoRaWAN®
    • 2.4 GHz (Bluetooth, Zigbee, Thread)
    • WiFi/WLAN (2.4 GHz, 5 GHz, 6 GHz)
    • GPS/GNSS
    • Evaluation Kits
  • ConnectorsToggle Dropdown
    • RF Connectors
    • RF Adapters
    • Cable Assemblies
    • Battery Holders
    • Lightning Arresters
  • Modules & RemotesToggle Dropdown
    • Wireless Remotes
    • Wireless UART RF Modules
    • Remote Control RF Modules
    • Transparent RF Modules
    • GPS & GNSS Modules
    • Remote Control Integrated Circuits
    • Interface Modules
    • RF Module Evaluation & Development Kits
    • End of Life RF Modules & Development Kits
  • Contact UsToggle Dropdown
    • Ask a Question
    • Employment
    • Distributor Network
    • Manufacturer’s Rep Network
    • Press
  • AboutToggle Dropdown
    • About Linx
    • Management Team
    • Privacy Policy
    • Terms of Use
    • Terms and Conditions

ANT-2.4-WRT-MON 2.4 GHz Dome Antenna

The ANT-2.4-WRT-MON is a low-profile, panel-mount monopole antenna designed for 2.4 GHz WiFi/WLAN and ISM applications including Bluetooth® and ZigBee®. The ANT-2.4-WRT-MON’s compact size allows it to be mounted in applications requiring a low profile and external antenna performance.

The antenna connects to the radio via SMA plug (male pin), RP-SMA plug (female socket) MHF1/ U.FL-type plug (female socket) or MHF4 plug (female socket) on 216 mm (8.5 in.) coaxial cable.

Features

  • Performance at 2.4 GHz to 2.5 GHz
    • VSWR: ≤ 1.7
    • Peak Gain: 2.7 dBi
    • Efficiency: 82%
  • Low-profile
    • Height: 27.0 mm (1.06 in)
  • Mounts permanently with pressure sensitive

    adhesive ring and provided hex nut

Applications

  • Single-band WiFi/WLAN
    • 802.11b/g
  • 2.4 GHz ISM applications
    • Bluetooth®
    • ZigBee®
    • IEEE 802.15.4
  • Internet of Things (IoT) devices
  • Smart Home networking
    • Sensing and remote monitoring
    • Security

Tagged With: 2.4 GHz, Bluetooth, ISM, IoT, SMA, U.FL, Wifi Antenna, WLAN Antenna, antenna wifi, wifi 4 antenna, 802.11 antenna, 802.11bg antenna, 802.11n antenna, 802.11ac antenna, 802.11ax antenna, C-V2V, ipex, mhf, C-V2X, vehicle to everything, vehicle to vehicle, C-V2I, vehicle to infrastructure, C-V2N, vehicle to network, 802.11be, ufl, sma connector, pin, male pin, brass, gold, DSRC, WiFi7, MHF-1, MHF-4, MHF4, UNII, ITS

ANT-DB1-WRT-MON WiFi Dome Antennas

The ANT-DB1-WRT-MON is a low-profile, panel-mount monopole antenna designed for use in the 2.4 GHz and 5 GHz bands supporting WiFi 5 and WiFi 4 in the 2.5 GHz and 5 GHz ranges. The ANT-DB1-WRT-MON’s compact size allows it to be mounted in applications requiring a low profile and external antenna performance.

Connector options for the ANT-DB1-WRT-MON antenna are: SMA plug (male pin), RP-SMA plug (female socket), MHF1/ U.FL-type plug (female socket), MHF3-type plug (female socket) or MHF4-type plug (female socket).

Features

  • Performance at 2.4 GHz to 2.5 GHz
    • VSWR: ≤ 2.2
    • Peak Gain: 2.1 dBi
    • Efficiency: 70%
  • Low-profile
    • Installed height: 27.0 mm (1.06 in)
  • Mounts permanently with pressure sensitive adhesive ring and provided hex nut

Applications

  • WiFi/WLAN coverage
    • WiFi 5 (802.11ac)
    • WiFi 4 (802.11n)
    • 802.11b/g
  • 2.4 GHz ISM applications
    • Bluetooth®
    • ZigBee®
  • U-NII bands 1-4

Tagged With: Bluetooth, ISM, IoT, SMA, U.FL, Wifi Antenna, Dual-band Wifi Antenna, WLAN Antenna, antenna wifi, wifi 4 antenna, wifi 5 antenna, 802.11 antenna, 802.11bg antenna, 802.11n antenna, 802.11ac antenna, 802.11ax antenna, C-V2V, ipex, mhf, C-V2X, vehicle to everything, vehicle to vehicle, C-V2I, vehicle to infrastructure, C-V2N, vehicle to network, ufl, 5 ghz wifi antenna, 6 ghz wifi antenna, sma connector, pin, male pin, brass, gold, MHF-1, MHF-4, MHF4, UNII, MHF-3

ANT-2.4-MSA-TH1 2.4 GHz Antenna

The ANT-2.4-MSA-TH1 is a stamped metal antenna designed for 2.4 GHz ISM applications including Bluetooth® and ZigBee®, as well as single-band WiFi.

The ANT-2.4-MSA-TH1 exhibits excellent performance in a compact size (16.7 mm x 5.8 mm). It is packaged in trays and is designed for through-hole mounting directly to a printed circuit board.

Features

  • Performance at 2.4 GHz to 2.5 GHz
    • VSWR: ≤ 1.3
    • Peak Gain: 3.7 dBi
    • Efficiency: 87%
  • Compact, low-profile
    • 16.7 mm x 5.8 mm x 5.4 mm
  • Omnidirectional radiation pattern
  • Reflow- or hand-solder assembly

Applications

  • 2.4 GHz ISM
    • Bluetooth®
    • ZigBee®
  • Single-band WiFi/802.11
  • Sensing and remote monitoring
  • Hand-held devices
  • Internet of Things (IoT) devices

Tagged With: 2.4 GHz, Bluetooth, ISM, IoT, SMA, U.FL, Wifi Antenna, WLAN Antenna, antenna wifi, wifi 4 antenna, 802.11 antenna, 802.11bg antenna, 802.11n antenna, 802.11ac antenna, 802.11ax antenna, C-V2V, ipex, mhf, C-V2X, vehicle to everything, vehicle to vehicle, C-V2I, vehicle to infrastructure, C-V2N, vehicle to network, ufl, sma connector, pin, male pin, brass, gold, DSRC, MHF-1, MHF-4, MHF4, UNII, ITS

ANT-2.4-MMG2-SMA 2.4 GHz Antenna

The ANT-2.4-MMG2-SMA antenna is an external magnetic mount multiband antenna designed for WiFi/WLAN and 2.4 GHz ISM band applications such as Bluetooth® and ZigBee®.

The ANT-2.4-MMG2-SMA series antennas provide a ground plane independent dipole antenna solution which mounts to ferrous metallic surfaces using the integrated magnetic base.

The antenna terminates in an SMA plug (male pin) connector on a 1 meter, 2 meter or 3 meter length of RG-174/U coaxial cable.

Features

  • Performance at 2.4 GHz to 2.5 GHz
    • VSWR: ≤ 2.2
    • Peak Gain: 2.8 dBi
    • Efficiency: 46%
  • Ground plane independent dipole antenna
  • Compact, only 88.5 mm (3.48 in) tall
  • Integrated magnetic base securely attaches to ferrous metallic surfaces and allows for repositioning
  • SMA plug (male pin) connection

Applications

  • Single-band WiFi/WLAN/802.11
    • WiFi 4
  • 2.4 GHz ISM applications
    • Bluetooth®
    • ZigBee®
  • U-NII and ISM applications
  • Internet of Things (IoT) devices
  • Smart Home networking
  • Sensing and remote monitoring

Tagged With: 2.4 GHz, Bluetooth, ISM, IoT, SMA, U.FL, Wifi Antenna, WLAN Antenna, antenna wifi, wifi 4 antenna, 802.11 antenna, 802.11bg antenna, 802.11n antenna, 802.11ac antenna, 802.11ax antenna, C-V2V, ipex, mhf, C-V2X, vehicle to everything, vehicle to vehicle, C-V2I, vehicle to infrastructure, C-V2N, vehicle to network, ufl, sma connector, pin, male pin, brass, gold, DSRC, MHF-1, MHF-4, MHF4, UNII, ITS, magnetic, magnetic mount

ANT-5GW-MMG2-SMA 5G Antenna

The ANT-5GW-MMG2-SMA antenna is an external panel mount multiband antenna designed for 5G New Radio, LTE, and cellular IoT (LTE-M, NB-IoT) applications.

The ANT-5GW-MMG2-SMA series antennas provide a ground plane independent dipole antenna solution which mounts to ferrous metallic surfaces using the integrated magnetic base.

The antenna terminates in an SMA plug (male pin) connector on a 1 meter, 2 meter or 3 meter length of RG-174/U coaxial cable.

Features

    • Performance at 698 MHz to 803 MHz
      • VSWR: ≤ 3.1
      • Peak Gain: 3.4 dBi
      • Efficiency: 87%
    • Performance at 791 MHz to 894 MHz
      • VSWR: ≤ 1.6
      • Peak Gain: 3.4 dBi
      • Efficiency: 93%
  • Ground plane independent dipole antenna
  • Compact, only 88.5 mm (3.48 in) tall
  • Integrated magnetic base securely attaches to ferrous metallic surfaces and allows for repositioning
  • SMA plug (male pin) connection

Applications

  • Worldwide 5G/4G/3G/2G
  • Cellular IoT: LTE-M (Cat-M1) and NB-IoT
  • Private cellular networks
    • Citizens Broadband Radio Service (CBRS)
  • 4.9 GHz Public Safety
  • Emerging 5G C-Band applications
  • Emerging 5G 2.5 GHz EBS applications
  • Remote control, monitoring and sensing
  • Internet of Things (IoT) devices
  • ISM applications

Tagged With: antenna, ISM, IoT, 433 MHz, LoRa, LoRaWAN, Panel Mount Antenna, LPWA, 450 Mhz, 5G midband antenna, 5G low band antenna, sub-6 antenna, CBRS antenna, 900 MHz antenna, 800 MHz antenna, 700 MHz antenna, Band 71, 600 MHz antenna, LTE antenna, omnidirectional, 5G NR, private cellular antenna, private lte antenna, citizens broadband radio service antenna, 3 GHz antenna, 3550 MHz antenna, 3.5 GHz antenna, 5G new radio antenna, ISM antenna, sub-1 GHz antenna, low power wide area, ground plane independent, 430 MHz, 435 MHz, remote sensing, ITU-T, y.4480, dipole5G antenna, 5G wideband antenna 5G sub-6 antenna

ANT-5GW-MMG1-SMA 5G Antenna

The ANT-5GW-MMG1-SMA antenna is an external magnetic mount multiband antenna designed for 5G New Radio, LTE, and cellular IoT (LTE-M, NB-IoT) applications.

The ANT-5GW-MMG1-SMA series antennas provide a ground plane independent dipole antenna solution which mounts to ferrous metallic surfaces using the integrated magnetic base.

The antenna terminates in an SMA plug (male pin) connector on a 1 meter, 2 meter or 3 meter length of RG-174/U coaxial cable.

Features

  • Performance at 698 MHz to 803 MHz
    • VSWR: ≤ 2.3
    • Peak Gain: 2.5 dBi
    • Efficiency: 80%
  • Performance at 3300 MHz to 4200 MHz
    • VSWR: ≤ 2.1
    • Peak Gain: 3.5 dBi
    • Efficiency: 28%
  • Ground plane independent dipole antenna
  • Compact, only 82.8 mm (3.26 in) tall
  • Integrated magnetic base securely attaches to ferrous metallic surfaces and allows for repositioning
  • SMA plug (male pin) connection

Applications

  • Worldwide 5G/4G/3G/2G
    • Cellular IoT: LTE-M (Cat-M1) and NB-IoT
  • Private cellular networks
    • Citizens Broadband Radio Service (CBRS)
  • 4.9 GHz Public Safety
  • Emerging 5G C-Band applications
  • Emerging 5G 2.5 GHz EBS applications
  • Remote control, monitoring and sensing
  • Internet of Things (IoT) devices
  • ISM applications

Tagged With: antenna, ISM, IoT, 433 MHz, LoRa, LoRaWAN, Panel Mount Antenna, LPWA, 450 Mhz, 5G midband antenna, 5G low band antenna, sub-6 antenna, CBRS antenna, 900 MHz antenna, 800 MHz antenna, 700 MHz antenna, Band 71, 600 MHz antenna, LTE antenna, omnidirectional, 5G NR, private cellular antenna, private lte antenna, citizens broadband radio service antenna, 3 GHz antenna, 3550 MHz antenna, 3.5 GHz antenna, 5G new radio antenna, ISM antenna, sub-1 GHz antenna, low power wide area, ground plane independent, 430 MHz, 435 MHz, remote sensing, ITU-T, y.4480, dipole5G antenna, 5G wideband antenna 5G sub-6 antenna

ANT-2.4-MMG1-SMA 2.4 GHz Antenna

The ANT-2.4-MMG1-SMA antenna is an external magnetic mount multiband antenna designed for WiFi/WLAN and 2.4 GHz ISM band applications such as Bluetooth® and ZigBee®.

The ANT-2.4-MMG1-SMA series antennas provide a ground plane independent dipole antenna solution which mounts to ferrous metallic surfaces using the integrated magnetic base.

The antenna terminates in an SMA plug (male pin) connector on a 1 meter, 2 meter or 3 meter length of RG-174/U coaxial cable.

Features

  • Performance at 2.4 GHz to 2.5 GHz
    • VSWR: ≤ 1.8
    • Peak Gain: 0.7 dBi
    • Efficiency: 40%
  • Compact, only 82.8 mm (3.26 in) tall
  • Ground plane independent dipole antenna
  • Integrated magnetic base securely attaches to ferrous metallic surfaces and allows for repositioning
  • SMA plug (male pin) connection

Applications

  • Single-band WiFi/WLAN/802.11
    • WiFi 4
  • 2.4 GHz ISM applications
    • Bluetooth®
    • ZigBee®
  • U-NII and ISM applications
  • Internet of Things (IoT) devices
  • Smart Home networking
  • Sensing and remote monitoring

Tagged With: 2.4 GHz, Bluetooth, ISM, IoT, SMA, U.FL, Wifi Antenna, WLAN Antenna, antenna wifi, wifi 4 antenna, 802.11 antenna, 802.11bg antenna, 802.11n antenna, 802.11ac antenna, 802.11ax antenna, C-V2V, ipex, mhf, C-V2X, vehicle to everything, vehicle to vehicle, C-V2I, vehicle to infrastructure, C-V2N, vehicle to network, ufl, sma connector, pin, male pin, brass, gold, DSRC, MHF-1, MHF-4, MHF4, UNII, ITS, magnetic, magnetic mount

ANT-2.4-FPC-SF 2.4 GHZ Antenna

The Linx ANT-2.4-FPC-SF series antennas are 25 mm x 20 mm adhesive flexible printed circuit (FPC) antennas for 2.4 GHz ISM applications including Bluetooth® and ZigBee®, as well as single-band WiFi.

The ANT-2.4-FPC-SF antennas provide a ground plane independent dipole internal/embedded antenna solution. The flexibility and adhesive backing makes the ANT-2.4-FPC-SF series easy to mount in RF transparent (e.g. plastic) enclosures, enabling environmental sealing and for protection from antenna damage.

Connection is made to the radio via a coaxial cable terminated in an MHF1/U.FL-type plug (female socket), or MHF4 plug (female socket) connector.

Features

  • Performance at 2.4 GHz to 2.5 GHz
    • VSWR: ≤ 1.9
    • Peak Gain: 3.9 dBi
    • Efficiency: 64%
  • Ground plane independent dipole antenna
  • Compact, low-profile
    • 25.4 mm x 20.1 mm x 0.1 mm
  • Adhesive backing permanently adheres to non-metal enclosures using 3M 467MP™/200MP adhesive
  • Flexible to fit in challenging enclosures

Applications

  • 2.4 GHz ISM
    • Bluetooth®
    • ZigBee®
  • Single-band WiFi/802.11
  • Sensing and remote monitoring
  • Hand-held devices
  • Internet of Things (IoT) devices

Tagged With: 2.4 GHz, Bluetooth, ISM, IoT, SMA, U.FL, Wifi Antenna, WLAN Antenna, antenna wifi, wifi 4 antenna, 802.11 antenna, 802.11bg antenna, 802.11n antenna, 802.11ac antenna, 802.11ax antenna, C-V2V, ipex, mhf, C-V2X, vehicle to everything, vehicle to vehicle, C-V2I, vehicle to infrastructure, C-V2N, vehicle to network, ufl, sma connector, pin, male pin, brass, gold, DSRC, MHF-1, MHF-4, MHF4, UNII, ITS

ANT-2.4-FPC-SAH 2.4 GHZ Antenna

The Linx ANT-2.4-FPC-SAH series antennas are 12 mm x 8 mm adhesive flexible printed circuit (FPC) antennas for 2.4 GHz ISM applications including Bluetooth® and ZigBee®, as well as single-band WiFi.

The ANT-2.4-FPC-SAH antennas provide a ground plane independent dipole internal/embedded antenna solution. The flexibility and adhesive backing makes the ANT-2.4-FPC-SAH series easy to mount in RF transparent (e.g. plastic) enclosures, enabling environmental sealing and for protection from antenna damage.

Connection is made to the radio via a coaxial cable terminated in an MHF1/U.FL-type plug (female socket), or MHF4 plug (female socket) connector.

Features

  • Performance at 2.4 GHz to 2.5 GHz
    • VSWR: ≤ 4.1
    • Peak Gain: 0.1 dBi
    • Efficiency: 28%
  • Ground plane independent dipole antenna
  • Compact, low-profile
    • 12.4 mm x 8.2 mm x 0.1 mm
  • Adhesive backing permanently adheres to non-metal enclosures using 3M 467MP™/200MP adhesive
  • Flexible to fit in challenging enclosures

Applications

  • 2.4 GHz ISM
    • Bluetooth®
    • ZigBee®
  • Single-band WiFi/802.11
  • Sensing and remote monitoring
  • Hand-held devices
  • Internet of Things (IoT) devices

Tagged With: 2.4 GHz, Bluetooth, ISM, IoT, SMA, U.FL, Wifi Antenna, WLAN Antenna, antenna wifi, wifi 4 antenna, 802.11 antenna, 802.11bg antenna, 802.11n antenna, 802.11ac antenna, 802.11ax antenna, C-V2V, ipex, mhf, C-V2X, vehicle to everything, vehicle to vehicle, C-V2I, vehicle to infrastructure, C-V2N, vehicle to network, ufl, sma connector, pin, male pin, brass, gold, DSRC, MHF-1, MHF-4, MHF4, UNII, ITS

ANT-2.4-FPC-LV 2.4 GHZ Antenna

The Linx ANT-2.4-FPC-LV series antennas are 45 mm x 7 mm adhesive flexible printed circuit (FPC) antennas for 2.4 GHz ISM applications including Bluetooth® and ZigBee®, as well as single-band WiFi.

The ANT-2.4-FPC-LV antennas provide a ground plane independent dipole internal/embedded antenna solution. The flexibility and adhesive backing makes the ANT-2.4-FPC-LV series easy to mount in RF transparent (e.g. plastic) enclosures, enabling environmental sealing and for protection from antenna damage.

Connection is made to the radio via a coaxial cable terminated in an MHF1/U.FL-type plug (female socket), MHF4 plug (female socket) or MMCX plug (male pin) connector.

Features

  • Performance at 2.4 GHz to 2.5 GHz
    • VSWR: ≤ 1.4
    • Peak Gain: 6.1 dBi
    • Efficiency: 81%
  • Ground plane independent dipole antenna
  • Compact, low-profile
    • 45.2 mm x 7.2 mm x 0.1 mm
  • Adhesive backing permanently adheres to non-metal enclosures using 3M 467MP™/200MP adhesive
  • Flexible to fit in challenging enclosures

Applications

  • 2.4 GHz ISM:
    • Bluetooth®
    • ZigBee®
  • Single-band WiFi/802.11
  • Sensing and remote monitoring
  • Hand-held devices
  • Internet of Things (IoT) devices

Tagged With: 2.4 GHz, Bluetooth, ISM, IoT, SMA, U.FL, Wifi Antenna, WLAN Antenna, antenna wifi, wifi 4 antenna, 802.11 antenna, 802.11bg antenna, 802.11n antenna, 802.11ac antenna, 802.11ax antenna, C-V2V, ipex, mhf, C-V2X, vehicle to everything, vehicle to vehicle, C-V2I, vehicle to infrastructure, C-V2N, vehicle to network, ufl, sma connector, pin, male pin, brass, gold, DSRC, MHF-1, MHF-4, MHF4, UNII, ITS

Next Page »

Products

  • Antennas
  • Connectors
  • RF Modules
  • GPS & GNSS Modules
  • Wireless Remotes

Support

  • Get Support
  • Application Notes
  • FAQ
  • Software & Drivers
  • Blog
  • Notices
  • Quality & Environment

About Us

  • About Linx
  • Management Team
  • Press Releases
  • Brands & Trademarks
  • Privacy Policy
  • Terms of Use
  • Terms & Conditions

Contact Us

  • Contact Us
  • Get a Quote
  • Distributor Network
  • Manufacturer’s Rep Network
  • Employment

Linx Technologies

159 Ort Lane
Merlin, OR, US 97532
Toll Free: 1-800-736-6677
Intl: 1-541-471-6256
Fax: 1-541-471-6251
contact@linxtechnologies.com
  • LinkedIn

Copyright © 2022 Linx Technologies · Log in

Manage Cookie Consent

The Linx Technologies website uses cookies for essential services and an improved user experience. By using our website, you consent to our Privacy Policy and Terms of Use.

Functional cookies Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes. The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
Manage options Manage services Manage vendors Read more about these purposes
View preferences
{title} {title} {title}