Linx Technologies
  • Home
  • AntennasToggle Dropdown
    • Cellular
    • NB-IoT and LTE-M
    • Sub 1 GHz ISM and LoRaWAN®
    • 2.4 GHz (Bluetooth, Zigbee, Thread)
    • WiFi/WLAN (2.4 GHz, 5 GHz, 6 GHz)
    • GPS/GNSS
    • Evaluation Kits
  • ConnectorsToggle Dropdown
    • RF Connectors
    • RF Adapters
    • Cable Assemblies
    • Battery Holders
    • Lightning Arresters
  • Modules & RemotesToggle Dropdown
    • Wireless Remotes
    • Wireless UART RF Modules
    • Remote Control RF Modules
    • Transparent RF Modules
    • GPS & GNSS Modules
    • Remote Control Integrated Circuits
    • Interface Modules
    • RF Module Evaluation & Development Kits
    • End of Life RF Modules & Development Kits
  • Contact UsToggle Dropdown
    • Ask a Question
    • Employment
    • Distributor Network
    • Manufacturer’s Rep Network
    • Press
  • AboutToggle Dropdown
    • About Linx
    • Management Team
    • Privacy Policy
    • Terms of Use
    • Terms and Conditions

915-NUB LPWA Antenna

The ANT-915-NUB-ccc is an extremely compact whip-style antenna designed for sub-1 GHz and low-power, wide-area (LPWA) applications including LoRaWAN®, IoT, remote controls, and ISM band applications in the 902 MHz to 930 MHz range.

The ANT-915-NUB-ccc is a rugged monopole antenna with a length of less than 18 mm. The ANT-915-NUB-ccc may be used with metallic and non-metallic enclosures. The antenna connects using an SMA plug (male pin) or RP-SMA plug (female socket) connector.

Features

  • Performance at 902 MHz to 930 MHz
    • VSWR: ≤ 2.6
    • Peak Gain: 3.9 dBi
    • Efficiency: 38%
  • Compact size
    • Height 17.7 mm (0.70 in)
    • Diameter 7.0 mm (0.28 in)
  • AEC-Q200 Grade 2 compliance
  • Omnidirectional radiation pattern
  • SMA plug (male pin) or RP-SMA plug (female socket) connection

Applications

  • Low-power, wide-area (LPWA) applications
    • LoRaWAN®, ITU-T Y.4480
  • ISM applications
  • Remote control, sensing and monitoring
    • Security systems
    • Industrial machinery
    • Automated equipment
    • AMR (automated meter reading)
  • Drone antenna
  • FPV antenna
  • UAV antenna
  • Internet of Things (IoT) devices
  • Smart Home networking
  • Hand-held devices

Tagged With: 868 MHz, Monopole, ISM, External, 915 MHz, LoRa, LoRaWAN, Sigfox, LPWA, omnidirectional, 862 MHz, 876 MHz, 902 MHz, 930 MHz, sub-1 GHz antenna, low power wide area, halow, 1/4 wave, compact, Whip antenna, ITU-T, y.4480, drone antenna, FPV antenna, UAV antenna

868-NUB LPWA Antenna

The ANT-868-NUB-ccc is an extremely compact whip-style antenna designed for sub-1 GHz and low-power, wide-area (LPWA) applications including LoRaWAN® and Sigfox®, IoT, remote controls, and ISM band applications in the 862 MHz to 876 MHz range.

The ANT-868-NUB-ccc is a rugged monopole antenna with a length of less than 20 mm. The ANT-868-NUB-ccc may be used with metallic and non-metallic enclosures. The antenna connects using an SMA plug (male pin) or RP-SMA plug (female socket) connector.

Features

  • Performance at 862 MHz to 876 MHz
    • VSWR: ≤ 1.7
    • Peak Gain: 4.2 dBi
    • Efficiency: 51%
  • Compact size
    • Height 19.7 mm (0.78 in)
    • Diameter 7.0 mm (0.28 in)
  • AEC-Q200 Grade 2 compliance
  • Omnidirectional radiation pattern
  • SMA plug (male pin) or RP-SMA plug (female socket) connection

Applications

  • Low-power, wide-area (LPWA) applications
    • LoRaWAN®, ITU-T Y.4480
    • Sigfox®
  • ISM applications
  • Remote control, sensing and monitoring
    • Security systems
    • Industrial machinery
    • Automated equipment
    • AMR (automated meter reading)
  • Internet of Things (IoT) devices
  • Smart Home networking
  • Hand-held devices

Tagged With: 868 MHz, Monopole, ISM, External, 915 MHz, LoRa, LoRaWAN, Sigfox, LPWA, omnidirectional, 862 MHz, 876 MHz, 902 MHz, 930 MHz, sub-1 GHz antenna, low power wide area, halow, 1/4 wave, compact, Whip antenna, ITU-T, y.4480

915-VHETH LPWA Antenna

The ANT-915-VHETH antenna is a compact surface mount helical antenna for low-power, wide-area (LPWA) applications including LoRaWAN®, remote controls, and ISM band applications in the 902 MHz to 930 MHz range.

The ANT-915-VHETH antenna is made from 0.6 mm diameter nickel plated high-carbon steel for use in PCB-mount installations requiring a rugged, compact and omnidirectional embedded antenna.

The connector-style base of the antenna ensures proper mounting for uniform performance in high-volume manufacturing.

Features

  • Performance at 902 MHz to 930 MHz
    • VSWR: ≤ 2.3
    • Peak Gain: 0.9 dBi
    • Efficiency: 58%
  • Direct PCB attachment
  • Reflow- or hand-solder assembly
  • Omnidirectional radiation pattern
  • Compact size
    • 44.3 mm x 7.0 mm x 7.0 mm

Applications

  • Low-power, wide-area (LPWA) applications
    • LoRaWAN®, ITU-T Y.4480
  • ISM applications
  • Remote control, sensing and monitoring
    • Security systems
    • Industrial machinery
    • Automated equipment
    • AMR (automated meter reading)
  • Internet of Things (IoT) devices
  • Smart Home networking

Tagged With: Embedded Antenna, Monopole, ISM, 915 MHz, LoRa, LoRaWAN, Sigfox, LPWA, omnidirectional, 902 MHz, 930 MHz, sub-1 GHz antenna, low power wide area, halow, Helical antenna, surface mount antenna, PCB antenna, 1/4 wave, ITU-T Y.4480

RHS Compact Straight 450 MHz Antenna

The ANT-450-RHS-SMA is a compact whip-style antenna for cellular and cellular IoT (LTE-M, NB-IoT) applications in the 450 MHz to 470 MHz range including LTE bands 72, 73 and 31.

 

The ANT-450-RHS-SMA is a rugged and compact monopole antenna with a height of only 51.8 mm. The ANT-450-RHS-SMA may be used with plastic or metal enclosures.

Features

  • Compact size
    • Height 51.8 mm (2.04 in)
    • Diameter 9.0 (0.35 in)
  • Performance at 450 MHz to 470 MHz
    • VSWR: ≤ 2.1
    • Peak Gain: -8.2 dBi
    • Efficiency: 5%
  • SMA plug (male pin) connection

Applications

  • Cellular IoT:
    • LTE-M (Cat-M1)
    • NB-IoT
  • 450 MHz LTE bands 72, 73 and 31
  • Hand-held devices
  • Remote control, monitoring and sensing
  • Internet of Things (IoT) devices

 

Tagged With: remote control, NB-IoT, CAT-M1, antenna, Cellular, LTE-M, Monopole, IoT, SMA, LTE Band 31, 450 Mhz, omnidirectional, 50 Ω, compact, whip, 470 MHz, band 72, band 73, rugged, LTE band 72, LTE band 73, LTE 450, 450 LTE, 450 MHz LTE, 450 MHz Alliance, Cellular IoT

RHR Compact Right Angle 450 MHz Antenna

The ANT-450-RHR-SMA is a compact right angle whip-style antenna for cellular and cellular IoT (LTE-M, NB-IoT) applications in the 450 MHz to 470 MHz range including LTE bands 72, 73 and 31.

The ANT-450-RHR-SMA is a rugged and compact monopole antenna with a height of only 51.2 mm. The ANT-450-RHR-SMA may be used with plastic or metal enclosures.

Features

  • Compact size
  • 51.2 mm x 18.2 mm x 9.0 mm
  • Performance at 450 MHz to 470 MHz
    • VSWR: ≤ 2.1
    • Peak Gain: -4.6 dBi
    • Efficiency: 12%
  • SMA plug (male pin) connection

Applications

  • Cellular IoT:
    • LTE-M (Cat-M1)
    • NB-IoT
  • 450 MHz LTE bands 72, 73 and 31
  • Hand-held devices
  • Remote control, monitoring and sensing
  • Internet of Things (IoT) devices

Tagged With: remote control, NB-IoT, CAT-M1, antenna, Cellular, LTE-M, Monopole, IoT, SMA, LTE Band 31, 450 Mhz, omnidirectional, 50 Ω, compact, whip, 470 MHz, band 72, band 73, rugged, LTE band 72, LTE band 73, LTE 450, 450 LTE, 450 MHz LTE, 450 MHz Alliance, Cellular IoT

microSplatch® uSP410 915 MHz Antenna

The microSplatch® uSP410 915 MHz antenna is a surface-mount monopole antenna for embedded Sub-1 GHz and low-power, wide-area (LPWA) applications including LoRaWAN®, remote controls, and ISM band applications in the 902 MHz to 930 MHz band.

uSP410 series monopole antennas use a grounded-line technique to achieve outstanding performance in a compact surface-mount package. The uSP410 series exhibits low proximity effect, making it a good embedded antenna choice for devices typically subject to nearby interference.

uSP410 series antennas are available in tape and reel packaging and are designed for reflow-solder mounting directly to a printed circuit board for high-volume applications.

Features

  • Performance at 902 MHz to 930 MHz
    • VSWR: ≤ 2.9
    • Peak Gain: 0.9 dBi
    • Efficiency: 27%
  • Omnidirectional radiation pattern
  • Compact package
    • 13.2 mm x 9.1 mm x 2.9 mm
  • Direct surface-mount PCB attachment
  • Reflow- or hand-solder assembly
  • Resistant to proximity effect from nearby interferers
  • Excellent performance with small ground plane (38 mm x 84 mm)

Applications

  • Low-power, wide-area (LPWA) applications
    • LoRaWAN®
    • Sigfox®
    • WiFi HaLow™
  • Remote sensing, monitoring and control
    • Security systems
    • Industrial Machinery
  • Internet of Things (IoT) devices
  • ISM applications
  • Smart Home networking
  • Hand-held devices

 

Tagged With: Chip Antenna, Embedded Antenna, Tape and Reel, Monopole, ISM, 915 MHz, LoRa, LoRaWAN, Sigfox, LPWA, omnidirectional, 902 MHz, 928 MHz, 930 MHz, sub-1 GHz antenna, low power wide area, halow, surface mount antenna, PCB antenna, 1/4 wave, proximity effect, tiny antenna, microsplatch, splatch, tape & reel, virtual antenna

microSplatch® uSP410 868 MHz Antenna

The microSplatch™ uSP410 868 MHz antenna is a surface-mount monopole antenna for embedded Sub-1 GHz and low-power, wide-area (LPWA) applications including LoRaWAN®, SigFox®, remote controls, and ISM applications in the 862 MHz to 876 MHz range.

uSP410 series monopole antennas use a grounded-line technique to achieve outstanding performance in a compact surface-mount package. The uSP410 series exhibits low proximity effect, making it a good embedded antenna choice for devices typically subject to nearby interferers.

uSP410 series antennas are available in tape and reel packaging and are designed for reflow-solder mounting directly to a printed circuit board for high-volume applications.

Features

  • Performance at 862 MHz to 876 MHz
    • VSWR ≤ 2.1
  • Omnidirectional radiation pattern
  • Compact package
    • 13.2 mm x 9.1 mm x 2.9 mm
  • Direct surface-mount PCB attachment
  • Reflow- or hand-solder assembly
  • Resistant to proximity effect from nearby interferers
  • Excellent performance with small ground plane (38 mm x 84 mm)

Applications

  • Low-power, wide-area (LPWA) applications
    • LoRaWAN®
    • Sigfox®
    • WiFi HaLow™
  • Remote sensing, monitoring and control
    • Security systems
    • Industrial machinery
  • Internet of Things (IoT) devices
  • ISM applications
  • Smart Home networking
  • Hand-held devices
  • Gateways

Tagged With: 868 MHz, Chip Antenna, Embedded Antenna, Tape and Reel, Monopole, ISM, LoRa, LoRaWAN, LPWA, omnidirectional, sub-1 GHz antenna, low power wide area, halow, surface mount antenna, PCB antenna, 1/4 wave, Weightless-p, proximity effect, tiny antenna, microsplatch, splatch, tape & reel, virtual antenna

microSplatch® uSP410 433 MHz Antenna

The microSplatch™ uSP410 433 MHz antenna is a surface-mount monopole antenna for embedded Sub-1 GHz and low-power, wide-area (LPWA) applications including LoRaWAN®, and remote control applications.

uSP410 series monopole antennas use a grounded-line technique to achieve outstanding performance in a compact surface-mount package. The uSP410 series exhibits low proximity effect, making it a good embedded antenna choice for devices typically subject to nearby interferers.

uSP410 series antennas are available in tape and reel packaging and are designed for reflow-solder mounting directly to a printed circuit board for high-volume applications.

Features

  • Performance at 430 MHz to 435 MHz
    • VSWR: ≤ 2.2
  • Omnidirectional radiation pattern
  • Compact package
    • 13.2 mm x 9.1 mm x 2.9 mm
  • Direct surface-mount PCB attachment
  • Reflow- or hand-solder assembly
  • Resistant to proximity effect from nearby interferers
  • Excellent performance with small ground plane (38 mm x 84 mm)

Applications

  • Low-power, wide-area (LPWA) applications
    • LoRaWAN®, ITU-T Y.4480
  • Internet of Things (IoT) devices
  • ISM applications
  • Smart Home networking
  • Remote sensing, monitoring and control
    • Security systems
    • Garage/gate openers
    • Weather reporting
    • Vending machines
  • Hand-held devices

Tagged With: Chip Antenna, Embedded Antenna, Tape and Reel, Monopole, ISM, 433 MHz, LoRa, LoRaWAN, LPWA, omnidirectional, sub-1 GHz antenna, low power wide area, halow, surface mount antenna, PCB antenna, 1/4 wave, Weightless-p, proximity effect, tiny antenna, microsplatch, splatch, tape & reel, virtual antenna

SP610 Splatch® Antenna Evaluation Kits

Evaluate SP610 antennas, or prototype designs with the SP610 antenna evaluation kit. Antenna evaluation kits provide the opportunity to benchmark performance against the product datasheet and other offerings. Kits also enable testing of antenna performance under simulated interference conditions and provide a benchmark for comparison with product design prototypes. For even more support, contact Linx Technologies for a design consultation.

Features

    • Compact package (40 mm x 10 mm x 2.8 mm)
    • Excellent performance with small ground plane (102 mm x 45 mm)
  • Mounted Antenna Included
  • Resistant to proximity effect from nearby interferers
  • Omnidirectional radiation pattern
  • Direct surface-mount PCB attachment
  • Reflow- or hand-solder assembly

Applications

  • Cellular IoT: LTE-M (Cat-M1) and NB-IoT
  • Worldwide LTE, UMTS and GSM
  • Low-power, wide-area (LPWA)
  • Smart Home networking
  • Sensing and remote monitoring
  • Internet of Things (IoT) devices

Tagged With: NB-IoT, CAT-M1, antenna, Cellular, LTE, LTE-M, Multi-Band, Surface Mount, Tape and Reel, Monopole, SMD, Multiband, Verizon LTE-M, ATT LTE-M, T-Mobile LTE-M, virtual antenna

SP610 Splatch® Antennas

Linx Technologies’ Splatch® SP610 is a surface-mount monopole antenna for embedded LTE and cellular IoT (LTE-M and NB-IoT) applications. The SP610 specifically supports low-frequency LTE bands from 698 MHz to 960 MHz, notably the 700 MHz bands, and 1710 MHz to 2700 MHz making it an outstanding antenna for LTE and cellular low-power wide-area (LPWA) applications in North America, Europe and worldwide.

The SP610 uses a grounded-line technique to achieve outstanding performance when subject to nearby sources of interference.

It is available in tape and reel packaging and is designed for reflow-solder mounting directly to a printed circuit board for high-volume applications.

 

Features

  • 700 MHz bands: Efficiency 61%, Peak Gain 5.1 dBi, VSWR ≤ 3.4
  • Compact package (40 mm x 10 mm x 2.8 mm)
  • Excellent performance with small ground plane (102 mm x 45 mm)
  • Resistant to proximity effect from nearby interferers
  • Direct surface-mount PCB attachment
  • Reflow- or hand-solder assembly

Applications

  • Cellular IoT: LTE-M (Cat-M1) and NB-IoT
  • Worldwide LTE, UMTS and GSM
  • Low-power, wide-area (LPWA)
  • Smart Home Networking
  • Sensing and remote monitoring
  • Internet of Things (IoT) devices

Selected Carrier and Regional Performance

Carrier/RegionLTE BandsMaximum VSWR
AT&T, T-Mobile (North America)2, 4, 5, 12, 14, 17, 29, 30, 663.4
Verizon (North America)2, 4, 5, 13, 663.4
Sprint (North America)25, 263.4
Europe, Latin America1, 3, 8, 20, 283.4
 

Tagged With: NB-IoT, CAT-M1, Cellular, LTE, LTE-M, Multi-Band, Surface Mount, Tape and Reel, Monopole, SMD, Multiband, Verizon LTE-M, ATT LTE-M, T-Mobile LTE-M, virtual antenna

Next Page »

Products

  • Antennas
  • Connectors
  • RF Modules
  • GPS & GNSS Modules
  • Wireless Remotes

Support

  • Get Support
  • Application Notes
  • FAQ
  • Software & Drivers
  • Blog
  • Notices
  • Quality & Environment

About Us

  • About Linx
  • Management Team
  • Press Releases
  • Brands & Trademarks
  • Privacy Policy
  • Terms of Use
  • Terms & Conditions

Contact Us

  • Contact Us
  • Get a Quote
  • Distributor Network
  • Manufacturer’s Rep Network
  • Employment

Linx Technologies

159 Ort Lane
Merlin, OR, US 97532
Toll Free: 1-800-736-6677
Intl: 1-541-471-6256
Fax: 1-541-471-6251
contact@linxtechnologies.com
  • LinkedIn

Copyright © 2022 Linx Technologies · Log in

Manage Cookie Consent

The Linx Technologies website uses cookies for essential services and an improved user experience. By using our website, you consent to our Privacy Policy and Terms of Use.

Functional cookies Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes. The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
Manage options Manage services Manage vendors Read more about these purposes
View preferences
{title} {title} {title}