nSP250 nanoSplatch® Antennas

The nanoSplatch® nSP250 is a surface-mount antenna for embedded WiFi/WLAN and other 2.4 GHz or 5 GHz ISM or U-NII frequency band applications. It uses a grounded-line technique to achieve outstanding performance in a tiny surface-mount package. The nSP250 exhibits low proximity effect with a very hemispherical radiation pattern, making it ideal for handheld devices and applications typically subject to interference.

 

The nSP250 is available in tape and reel packaging and is designed for reflow-solder mounting directly to a printed circuit board for high-volume applications.

Features

  • Ultra-compact package (9.6 mm x 8.4 mm x 1.1 mm)
  • Excellent performance with smallest ground plane (40 mm x 20 mm)
  • Resistant to proximity effect
  • Omnidirectional radiation pattern
  • Direct surface-mount PCB attachment
  • Reflow- or hand-solder assembly
  • High gain (2.7 dBi at 2.4 GHz, 3.7 dBi at 5.8 GHz)
  • High efficiency (66% at 2.4 GHz, 69% at 5.8 GHz)

Applications

  • Single- and dual-band WiFi/WLAN/802.11
  • Bluetooth® and ZigBee®
  • Smart Home networking
  • Sensing and remote monitoring
  • Hand-held devices
  • Internet of Things (IoT) devices
  • U-NII and ISM applications

 

nanoSplatch® Antenna Evaluation Kits

Evaluate nanoSplatch® antennas, or prototype designs with the nanoSplatch antenna evaluation kit. Antenna evaluation kits provide the opportunity to benchmark performance against the product datasheet and other offerings. Kits also enable testing of antenna performance under simulated interference conditions and provide a benchmark for comparison with product design prototypes. For even more support, contact Linx Technologies for a design consultation.

Features

  • Compact design for product development (31.6 mm x 40.6 mm)
  • High performance with small ground plane (40 mm x 20 mm)
  • Mounted antenna included
  • Surface mount pads for pi matching network
  • Includes zero-ohm resistor for bypassing matching network
  • U.FL/MHF plug (male) connector for cable attachments to test equipment or prototype (cable not included)
  • Cable tie-down holes (optional use)

Applications

  • Single- and dual-band WiFi/WLAN/802.11
  • Bluetooth® and ZigBee®
  • Smart Home networking
  • Sensing and remote monitoring
  • Hand-held devices
  • Internet of Things (IoT) devices
  • U-NII and ISM applications

 

PW Series Antennas

PW Series antennas are rugged panel-mount monopole external antennas suitable for metal and plastic enclosures with appropriate ground plane. They target a broad range of solutions in low-power wide-area (LPWA) networks, LTE cellular, and industrial, scientific and medical (ISM) frequency band applications. With just a single frequency range to manage, PW Series single-band antennas make the job of antenna selection simple and, for LTE cellular applications, typically outperform multiband counterparts over desired frequencies and reject signals from unwanted frequencies.

 

PW Series LTE band antennas are useful in single-band LTE-M (Cat-M1) and NB-IoT cellular IoT solutions and are easy to select using the antenna number corresponding to the target LTE band (e.g. LTE Band 13 applications use ANT-B13-PW-QW-UFL). The LTE Band 14 antenna supports FirstNet® Public Safety applications in the United States and many of the LTE antennas also support legacy UMTS and GSM cellular frequencies.

 

LoRaWAN® and SIGFOX® low-power wide-area (LPWA) solutions may use the 433 MHz, 490 MHz, 868 MHz and 916 MHz PW antennas depending on application and region. The 433 MHz and 916 MHz antennas also support ISM applications, along with the 2.4 GHz antenna which is suitable for Bluetooth® and ZigBee® solutions.

 

For more information on target applications for PW antennas, please see the Specifications tab of this product page.

Features

  • Outperforms similar multiband solutions
  • Durable, flexible main shaft
  • Weather resistant for IP-rated applications
  • Wide bandwidth
  • O-ring compatible base
  • U.FL/MHF jack on 1.32 mm cable or unterminated RG-174 cable
  • Compatible with plastic and metal enclosures
  • Monopole construction

Applications

  • LTE-M (Cat-M1) and NB-IoT cellular IoT
  • LoRaWAN® and SIGFOX®
  • FirstNet® Public Safety
  • ISM/Bluetooth®/Zigbee®
  • Sensing and remote monitoring
  • Hand-held devices
  • Internet of Things (IoT) devices
  • Low-power wide-area (LPWA) networks

 

CW Series Antennas

CW Series antennas are rugged connectorized monopole external antennas suitable for metal and plastic enclosures with appropriate ground plane. They target a broad range of solutions in low-power wide-area (LPWA) networks, LTE cellular, and industrial, scientific and medical (ISM) frequency band applications. With just a single frequency range to manage, CW Series single-band antennas make the job of antenna selection simple and, for LTE cellular applications, typically outperform multiband counterparts over desired frequencies and reject signals from unwanted frequencies.

 

CW Series LTE band antennas are useful in single-band LTE-M (Cat-M1) and NB-IoT cellular IoT solutions and are easy to select using the antenna number corresponding to the target LTE band (e.g. LTE Band 13 applications use ANT-B13-CW-QW-SMA). The LTE Band 14 antenna supports FirstNet® Public Safety applications in the United States and many of the LTE antennas also support legacy UMTS and GSM cellular frequencies.

 

LoRaWAN® and SIGFOX® low-power wide-area (LPWA) solutions may use the 433 MHz, 490 MHz, 868 MHz and 916 MHz CW antennas depending on application and region. The 433 MHz and 916 MHz antennas also support ISM applications, along with the 2.4 GHz antenna which is suitable for Bluetooth® and ZigBee® solutions.

 

For more information on target applications for CW antennas, please see the Specifications tab of this product page.

Features

  • Outperforms similar multiband solutions
  • Durable, flexible main shaft
  • Wide bandwidth
  • Weather resistant for IP-rated applications
  • O-ring compatible base
  • SMA plug or FCC Part 15 compliant, reverse polarity SMA connector
  • Compatible with plastic and metal enclosures
  • Monopole Construction

Applications

  • LTE-M (Cat-M1) and NB-IoT cellular IoT
  • LoRaWAN® and SIGFOX®
  • FirstNet® Public Safety
  • ISM/Bluetooth®/ZigBee®
  • Sensing and remote monitoring
  • Hand-held devices
  • Internet of Things (IoT) devices
  • Low-power wide-area (LPWA) networks

Linx Technologies

159 Ort Lane
Merlin, OR, US 97532
Toll Free: 1-800-736-6677
Intl: 1-541-471-6256
Fax: 1-541-471-6251
info@linxtechnologies.com