SP610 Splatch® Antenna Evaluation Kits

Evaluate SP610 antennas, or prototype designs with the SP610 antenna evaluation kit. Antenna evaluation kits provide the opportunity to benchmark performance against the product datasheet and other offerings. Kits also enable testing of antenna performance under simulated interference conditions and provide a benchmark for comparison with product design prototypes. For even more support, contact Linx Technologies for a design consultation.

Features

    • Compact package (40 mm x 10 mm x 2.8 mm)
    • Excellent performance with small ground plane (102 mm x 45 mm)
  • Mounted Antenna Included
  • Resistant to proximity effect from nearby interferers
  • Omnidirectional radiation pattern
  • Direct surface-mount PCB attachment
  • Reflow- or hand-solder assembly

Applications

  • Cellular IoT: LTE-M (Cat-M1) and NB-IoT
  • Worldwide LTE, UMTS and GSM
  • Low-power, wide-area (LPWA)
  • Smart Home networking
  • Sensing and remote monitoring
  • Internet of Things (IoT) devices

SP610 Splatch® Antennas

Linx Technologies’ Splatch® SP610 is a surface-mount monopole antenna for embedded LTE and cellular IoT (LTE-M and NB-IoT) applications. The SP610 specifically supports low-frequency LTE bands from 698 MHz to 960 MHz, notably the 700 MHz bands, and 1710 MHz to 2700 MHz making it an outstanding antenna for LTE and cellular low-power wide-area (LPWA) applications in North America, Europe and worldwide.

The SP610 uses a grounded-line technique to achieve outstanding performance when subject to nearby sources of interference.

It is available in tape and reel packaging and is designed for reflow-solder mounting directly to a printed circuit board for high-volume applications.

 

Features

  • 700 MHz bands: Efficiency 61%, Peak Gain 5.1 dBi, VSWR ≤ 3.4
  • Compact package (40 mm x 10 mm x 2.8 mm)
  • Excellent performance with small ground plane (102 mm x 45 mm)
  • Resistant to proximity effect from nearby interferers
  • Direct surface-mount PCB attachment
  • Reflow- or hand-solder assembly

Applications

  • Cellular IoT: LTE-M (Cat-M1) and NB-IoT
  • Worldwide LTE, UMTS and GSM
  • Low-power, wide-area (LPWA)
  • Smart Home Networking
  • Sensing and remote monitoring
  • Internet of Things (IoT) devices

Selected Carrier and Regional Performance

Carrier/Region LTE Bands Maximum VSWR
AT&T, T-Mobile (North America) 2, 4, 5, 12, 14, 17, 29, 30, 66 3.4
Verizon (North America) 2, 4, 5, 13, 66 3.4
Sprint (North America) 25, 26 3.4
Europe, Latin America 1, 3, 8, 20, 28 3.4

nSP250 nanoSplatch™ Antennas

The nanoSplatch™ nSP250 is a surface-mount antenna for embedded WiFi/WLAN and other 2.4 GHz or 5 GHz ISM or U-NII frequency band applications. It uses a grounded-line technique to achieve outstanding performance in a tiny surface-mount package. The nSP250 exhibits low proximity effect with a very hemispherical radiation pattern, making it ideal for handheld devices and applications typically subject to interference.

 

The nSP250 is available in tape and reel packaging and is designed for reflow-solder mounting directly to a printed circuit board for high-volume applications.

Features

  • Ultra-compact package (9.6 mm x 8.4 mm x 1.1 mm)
  • Excellent performance with smallest ground plane (40 mm x 20 mm)
  • Resistant to proximity effect
  • Omnidirectional radiation pattern
  • Direct surface-mount PCB attachment
  • Reflow- or hand-solder assembly
  • High gain (2.7 dBi at 2.4 GHz, 3.7 dBi at 5.8 GHz)
  • High efficiency (66% at 2.4 GHz, 69% at 5.8 GHz)

Applications

  • Single- and dual-band WiFi/WLAN/802.11
  • Bluetooth® and ZigBee®
  • Smart Home networking
  • Sensing and remote monitoring
  • Hand-held devices
  • Internet of Things (IoT) devices
  • U-NII and ISM applications

 

nanoSplatch™ Antenna Evaluation Kits

Evaluate nanoSplatch antennas, or prototype designs with the nanoSplatch antenna evaluation kit. Antenna evaluation kits provide the opportunity to benchmark performance against the product datasheet and other offerings. Kits also enable testing of antenna performance under simulated interference conditions and provide a benchmark for comparison with product design prototypes. For even more support, contact Linx Technologies for a design consultation.

Features

  • Compact design for product development (31.6 mm x 40.6 mm)
  • High performance with small ground plane (40 mm x 20 mm)
  • Mounted antenna included
  • Surface mount pads for pi matching network
  • Includes zero-ohm resistor for bypassing matching network
  • U.FL/MHF plug (male) connector for cable attachments to test equipment or prototype (cable not included)
  • Cable tie-down holes (optional use)

Applications

  • Single- and dual-band WiFi/WLAN/802.11
  • Bluetooth® and ZigBee®
  • Smart Home networking
  • Sensing and remote monitoring
  • Hand-held devices
  • Internet of Things (IoT) devices
  • U-NII and ISM applications

 

CER Series Ceramic LTE Chip Antenna Evaluation Kit

Evaluate the performance of the CER Series ceramic chip antenna in your application environment with the CER Series LTE chip antenna evaluation kit. To help you get started, the kit includes an evaluation board along with extra antennas.

The tiny CER Series covers all common 5G/4G/3G/2G LTE bands, making it ideal for 3G and 4G cellular, LTE, CAT-M1 and NB-IOT applications. Its small size and surface-mount package make it easy to hide inside a product’s case.

CER Series Ceramic LTE Chip Antenna

The CER Series ceramic LTE chip antenna is a compact, high-efficiency antenna designed to be easily integrated into wireless telecommunication devices. Operating in all common 4G/3G/2G LTE bands, it has better efficiency and gain at lower cellular bands compared to competitive products, providing enhanced performance for NB-IoT (Narrow Band Internet of Things) and CAT-M1 applications. The CER Series antenna’s new, advanced design saves valuable board space and the integrated solution saves time and money for labor, cable, and connector costs during installation or deployment.

New CAT-M1 and NB-IoT standards are poised to take industrial wireless applications to a new level and Linx has designed new antennas to support these innovations. The CER series ceramic LTE chip antenna supports both wide-band LTE antennas and optimized antenna solutions for CAT-M1 and NB-IoT suitable for a wide array of applications.

If you’d like to contact us about the CER Series Ceramic LTE Chip Antenna, contact sales@linxtechnologies.com

Linx Technologies

159 Ort Lane
Merlin, OR, US 97532
Toll Free: 1-800-736-6677
Intl: 1-541-471-6256
Fax: 1-541-471-6251
info@linxtechnologies.com