Linx Technologies
  • AntennasToggle Dropdown
    • Cellular
    • NB-IoT and LTE-M
    • Sub 1 GHz ISM and LoRaWAN®
    • 2.4 GHz (Bluetooth, Zigbee, Thread)
    • WiFi/WLAN (2.4 GHz, 5 GHz, 6 GHz)
    • GPS/GNSS
    • Evaluation Kits
  • ConnectorsToggle Dropdown
    • RF Connectors
    • RF Adapters
    • Cable Assemblies
    • Battery Holders
    • Lightning Arresters
  • Modules & RemotesToggle Dropdown
    • Wireless Remotes
    • Wireless UART RF Modules
    • Remote Control RF Modules
    • Transparent RF Modules
    • GPS & GNSS Modules
    • Remote Control Integrated Circuits
    • Interface Modules
    • RF Module Evaluation & Development Kits
    • End of Life RF Modules & Development Kits
  • Contact UsToggle Dropdown
    • Ask a Question
    • Employment
    • Distributor Network
    • Manufacturer’s Rep Network
    • Press
  • AboutToggle Dropdown
    • About Linx
    • Management Team
    • Privacy Policy
    • Terms of Use
    • Terms and Conditions

AEK-GNL1-nSP Antenna Evaluation Kit

Evaluate and prototype the ANK-GNL1-nSP L1 antenna with the evaluation kit. For even more support, contact Linx Technologies for a design consultation.

Features

  • Performance
    • VSWR: ≤ 1.4
    • Peak Gain: 4.4 dBi
    • Efficiency: 63%
  • Compact package (9.6 mm x 8.4 mm x 0.9 mm)
  • Linear polarization
  • Omnidirectional radiation pattern
  • Direct surface-mount PCB attachment
  • Reflow- or hand-solder assembly

Applications

  • Global navigation
    • GPS L1C, L1C/A
    • Galileo E1
    • Galileo E1
    • Beidou B1C, B1I
    • QZSS L1
  • Timing solutions

Tagged With: U.FL, GPS, GNSS, GPS Antenna, GNSS Antenna, Galileo, Beidou, COMPASS, QNZZ, E1, B1, L1, navigation, global navigation, RHCP, ceramic patch, location, Galileo antenna, Beidou antenna, L1 antenna, E1 antenna, B1 antenna, QNZZ antenna, AEC-Q200, timing antenna, automotive location antenna, directional antenna, directional GNSS antenna, directional GPS antenna, amplified, active, amplifier, ceramic, ufl, mhf1, 1.13mm coax, coaxial, Galileo E1, Beidou B1I, GPS L1C/A, GPS L2, QZSS L1, GPS L5, Galileo E5A, Beidou B2A, NavIC L5, QZSS L5, Galileo E5B, Beidou B2B, QZSS L2, Beidou B1C

ANT-GNL1-nSP GNSS Antenna

The ANT-GNL1-nSP is a surface-mount embedded global navigation satellite system (GNSS) antenna supporting GPS, Galileo, Beidou and QZSS systems in the L1/E1/B1 bands.

The ANT-GNL1-nSP antenna exhibits excellent performance in a compact size (10 mm x 8 mm x 1 mm).

The ANT-GNL1-nSP is available in tape and reel packaging and is designed for reflow-solder mounting directly to a printed circuit board for high-volume applications.

Features

  • Performance
    • VSWR: ≤ 1.4
    • Peak Gain: 4.4 dBi
    • Efficiency: 63%
  • Compact package (9.6 mm x 8.4 mm x 0.9 mm)
  • Linear polarization
  • Omnidirectional radiation pattern
  • Direct surface-mount PCB attachment
  • Reflow- or hand-solder assembly

Applications

  • Global navigation
    • GPS L1C, L1C/A
    • Galileo E1
    • Beidou B1C, B1I
    • QZSS L1
  • Timing solutions

Tagged With: U.FL, GPS, GNSS, GPS Antenna, GNSS Antenna, Galileo, Beidou, COMPASS, QNZZ, E1, B1, L1, navigation, global navigation, RHCP, ceramic patch, location, Galileo antenna, Beidou antenna, L1 antenna, E1 antenna, B1 antenna, QNZZ antenna, AEC-Q200, timing antenna, automotive location antenna, directional antenna, directional GNSS antenna, directional GPS antenna, amplified, active, amplifier, ceramic, ufl, mhf1, 1.13mm coax, coaxial, Galileo E1, Beidou B1I, GPS L1C/A, GPS L2, QZSS L1, GPS L5, Galileo E5A, Beidou B2A, NavIC L5, QZSS L5, Galileo E5B, Beidou B2B, QZSS L2, Beidou B1C

ANT-2.4-WRT-MON 2.4 GHz Dome Antenna

The ANT-2.4-WRT-MON is a low-profile, panel-mount monopole antenna designed for 2.4 GHz WiFi/WLAN and ISM applications including Bluetooth® and ZigBee®. The ANT-2.4-WRT-MON’s compact size allows it to be mounted in applications requiring a low profile and external antenna performance.

The antenna connects to the radio via SMA plug (male pin), RP-SMA plug (female socket) MHF1/ U.FL-type plug (female socket) or MHF4 plug (female socket) on 216 mm (8.5 in.) coaxial cable.

Features

  • Performance at 2.4 GHz to 2.5 GHz
    • VSWR: ≤ 1.7
    • Peak Gain: 2.7 dBi
    • Efficiency: 82%
  • Low-profile
    • Height: 27.0 mm (1.06 in)
  • Mounts permanently with pressure sensitive

    adhesive ring and provided hex nut

Applications

  • Single-band WiFi/WLAN
    • 802.11b/g
  • 2.4 GHz ISM applications
    • Bluetooth®
    • ZigBee®
    • IEEE 802.15.4
  • Internet of Things (IoT) devices
  • Smart Home networking
    • Sensing and remote monitoring
    • Security

Tagged With: 2.4 GHz, Bluetooth, ISM, IoT, SMA, U.FL, Wifi Antenna, WLAN Antenna, antenna wifi, wifi 4 antenna, 802.11 antenna, 802.11bg antenna, 802.11n antenna, 802.11ac antenna, 802.11ax antenna, C-V2V, ipex, mhf, C-V2X, vehicle to everything, vehicle to vehicle, C-V2I, vehicle to infrastructure, C-V2N, vehicle to network, 802.11be, ufl, sma connector, pin, male pin, brass, gold, DSRC, WiFi7, MHF-1, MHF-4, MHF4, UNII, ITS

ANT-DB1-WRT-MON WiFi Dome Antennas

The ANT-DB1-WRT-MON is a low-profile, panel-mount monopole antenna designed for use in the 2.4 GHz and 5 GHz bands supporting WiFi 5 and WiFi 4 in the 2.5 GHz and 5 GHz ranges. The ANT-DB1-WRT-MON’s compact size allows it to be mounted in applications requiring a low profile and external antenna performance.

Connector options for the ANT-DB1-WRT-MON antenna are: SMA plug (male pin), RP-SMA plug (female socket), MHF1/ U.FL-type plug (female socket), MHF3-type plug (female socket) or MHF4-type plug (female socket).

Features

  • Performance at 2.4 GHz to 2.5 GHz
    • VSWR: ≤ 2.2
    • Peak Gain: 2.1 dBi
    • Efficiency: 70%
  • Low-profile
    • Installed height: 27.0 mm (1.06 in)
  • Mounts permanently with pressure sensitive adhesive ring and provided hex nut

Applications

  • WiFi/WLAN coverage
    • WiFi 5 (802.11ac)
    • WiFi 4 (802.11n)
    • 802.11b/g
  • 2.4 GHz ISM applications
    • Bluetooth®
    • ZigBee®
  • U-NII bands 1-4

Tagged With: Bluetooth, ISM, IoT, SMA, U.FL, Wifi Antenna, Dual-band Wifi Antenna, WLAN Antenna, antenna wifi, wifi 4 antenna, wifi 5 antenna, 802.11 antenna, 802.11bg antenna, 802.11n antenna, 802.11ac antenna, 802.11ax antenna, C-V2V, ipex, mhf, C-V2X, vehicle to everything, vehicle to vehicle, C-V2I, vehicle to infrastructure, C-V2N, vehicle to network, ufl, 5 ghz wifi antenna, 6 ghz wifi antenna, sma connector, pin, male pin, brass, gold, MHF-1, MHF-4, MHF4, UNII, MHF-3

ANT-2.4-MSA-TH1 2.4 GHz Antenna

The ANT-2.4-MSA-TH1 is a stamped metal antenna designed for 2.4 GHz ISM applications including Bluetooth® and ZigBee®, as well as single-band WiFi.

The ANT-2.4-MSA-TH1 exhibits excellent performance in a compact size (16.7 mm x 5.8 mm). It is packaged in trays and is designed for through-hole mounting directly to a printed circuit board.

Features

  • Performance at 2.4 GHz to 2.5 GHz
    • VSWR: ≤ 1.3
    • Peak Gain: 3.7 dBi
    • Efficiency: 87%
  • Compact, low-profile
    • 16.7 mm x 5.8 mm x 5.4 mm
  • Omnidirectional radiation pattern
  • Reflow- or hand-solder assembly

Applications

  • 2.4 GHz ISM
    • Bluetooth®
    • ZigBee®
  • Single-band WiFi/802.11
  • Sensing and remote monitoring
  • Hand-held devices
  • Internet of Things (IoT) devices

Tagged With: 2.4 GHz, Bluetooth, ISM, IoT, SMA, U.FL, Wifi Antenna, WLAN Antenna, antenna wifi, wifi 4 antenna, 802.11 antenna, 802.11bg antenna, 802.11n antenna, 802.11ac antenna, 802.11ax antenna, C-V2V, ipex, mhf, C-V2X, vehicle to everything, vehicle to vehicle, C-V2I, vehicle to infrastructure, C-V2N, vehicle to network, ufl, sma connector, pin, male pin, brass, gold, DSRC, MHF-1, MHF-4, MHF4, UNII, ITS

ANT-GNRM-L125A GNSS Antenna

The GNRM-L125A is a magnetic-mount global navigation satellite system (GNSS) antenna with integrated low noise amplifier (LNA), supporting GPS, Galileo, Beidou, NavIC and QZSS systems in the L1/E1/B1, L2/E5/B2B and L5/E5/B2A bands. The LNA provides high gain with a low noise figure. The antenna terminates in an SMA plug (male pin) connector on 1 meter, 3 meter or 5 meter lengths of RG-174/U coaxial cable.

Features

  • Performance at 1575.42 MHz
    • VSWR: ≤ 1.2
    • Peak Gain: 31.7 dBi
    • Axial Ratio: 1.0 dB
  • Performance at 1176.45 MHz
    • VSWR: ≤ 1.4
    • Peak Gain: 29.8 dBi
    • Axial Ratio: 2.5 dB
  • 27 dB (Typ.) LNA
  • Ground plane independent
  • Right-hand circularly polarized (RHCP)
  • Mounts to metal surfaces using integrated magnetic base

Applications

  • Global navigation
    • GPS L1C, L1C/A, L2, L5
    • Galileo E1, E5A, E5B
    • Beidou B1I, B1C, B2A, B2B
    • NavIC
    • QZSS L1, L2C, L5
  • Timing solutions

Tagged With: U.FL, GPS, GNSS, GPS Antenna, GNSS Antenna, Galileo, Beidou, COMPASS, QNZZ, E1, B1, L1, navigation, global navigation, RHCP, ceramic patch, location, Galileo antenna, Beidou antenna, L1 antenna, E1 antenna, B1 antenna, QNZZ antenna, AEC-Q200, timing antenna, automotive location antenna, directional antenna, directional GNSS antenna, directional GPS antenna, amplified, active, amplifier, ceramic, ufl, mhf1, 1.13mm coax, coaxial, Galileo E1, Beidou B1I, GPS L1C/A, GPS L2, QZSS L1, GPS L5, Galileo E5A, Beidou B2A, NavIC L5, QZSS L5, Galileo E5B, Beidou B2B, QZSS L2, Beidou B1C

ANT-GNRM-L15A GNSS Antenna

The GNRM-L15A is a magnetic-mount global navigation satellite system (GNSS) antenna with integrated low noise amplifier (LNA), supporting GPS, Galileo, Beidou, NavIC and QZSS systems in the L1/E1/B1 and L5/E5/B2A bands.

The LNA provides high gain with a low noise figure. The antenna terminates in an SMA plug (male pin) connector on 1 meter, 3 meter or 5 meter lengths of RG-174/U coaxial cable.

Features

  • Performance at 1575.42 MHz
    • VSWR: ≤ 1.3
    • Peak Gain: 30.5 dBi
    • Axial Ratio: 14.5 dB
  • Performance at 1176.45 MHz
    • VSWR: ≤ 1.3
    • Peak Gain: 28.9 dBi
    • Axial Ratio: 14.1 dB
  • 28 dB (Typ.) LNA
  • Ground plane independent
  • Right-hand circularly polarized (RHCP)
  • Mounts to metal surfaces using integrated magnetic base

Applications

  • Global navigation
    • GPS L1C, L1C/A, L5
    • Galileo E1, E5A
    • Beidou B2A, B1C
    • NavIC
    • QZSS L1, L5
  • Timing solutions

Tagged With: U.FL, GPS, GNSS, GPS Antenna, GNSS Antenna, Galileo, Beidou, COMPASS, QNZZ, E1, B1, L1, navigation, global navigation, RHCP, ceramic patch, location, Galileo antenna, Beidou antenna, L1 antenna, E1 antenna, B1 antenna, QNZZ antenna, AEC-Q200, timing antenna, automotive location antenna, directional antenna, directional GNSS antenna, directional GPS antenna, amplified, active, amplifier, ceramic, ufl, mhf1, 1.13mm coax, coaxial, Galileo E1, Beidou B1I, GPS L1C/A, GPS L2, QZSS L1, GPS L5, Galileo E5A, Beidou B2A, NavIC L5, QZSS L5, Galileo E5B, Beidou B2B, QZSS L2, Beidou B1C

ANT-2.4-MMG2-SMA 2.4 GHz Antenna

The ANT-2.4-MMG2-SMA antenna is an external magnetic mount multiband antenna designed for WiFi/WLAN and 2.4 GHz ISM band applications such as Bluetooth® and ZigBee®.

The ANT-2.4-MMG2-SMA series antennas provide a ground plane independent dipole antenna solution which mounts to ferrous metallic surfaces using the integrated magnetic base.

The antenna terminates in an SMA plug (male pin) connector on a 1 meter, 2 meter or 3 meter length of RG-174/U coaxial cable.

Features

  • Performance at 2.4 GHz to 2.5 GHz
    • VSWR: ≤ 2.2
    • Peak Gain: 2.8 dBi
    • Efficiency: 46%
  • Ground plane independent dipole antenna
  • Compact, only 88.5 mm (3.48 in) tall
  • Integrated magnetic base securely attaches to ferrous metallic surfaces and allows for repositioning
  • SMA plug (male pin) connection

Applications

  • Single-band WiFi/WLAN/802.11
    • WiFi 4
  • 2.4 GHz ISM applications
    • Bluetooth®
    • ZigBee®
  • U-NII and ISM applications
  • Internet of Things (IoT) devices
  • Smart Home networking
  • Sensing and remote monitoring

Tagged With: 2.4 GHz, Bluetooth, ISM, IoT, SMA, U.FL, Wifi Antenna, WLAN Antenna, antenna wifi, wifi 4 antenna, 802.11 antenna, 802.11bg antenna, 802.11n antenna, 802.11ac antenna, 802.11ax antenna, C-V2V, ipex, mhf, C-V2X, vehicle to everything, vehicle to vehicle, C-V2I, vehicle to infrastructure, C-V2N, vehicle to network, ufl, sma connector, pin, male pin, brass, gold, DSRC, MHF-1, MHF-4, MHF4, UNII, ITS, magnetic, magnetic mount

ANT-2.4-MMG1-SMA 2.4 GHz Antenna

The ANT-2.4-MMG1-SMA antenna is an external magnetic mount multiband antenna designed for WiFi/WLAN and 2.4 GHz ISM band applications such as Bluetooth® and ZigBee®.

The ANT-2.4-MMG1-SMA series antennas provide a ground plane independent dipole antenna solution which mounts to ferrous metallic surfaces using the integrated magnetic base.

The antenna terminates in an SMA plug (male pin) connector on a 1 meter, 2 meter or 3 meter length of RG-174/U coaxial cable.

Features

  • Performance at 2.4 GHz to 2.5 GHz
    • VSWR: ≤ 1.8
    • Peak Gain: 0.7 dBi
    • Efficiency: 40%
  • Compact, only 82.8 mm (3.26 in) tall
  • Ground plane independent dipole antenna
  • Integrated magnetic base securely attaches to ferrous metallic surfaces and allows for repositioning
  • SMA plug (male pin) connection

Applications

  • Single-band WiFi/WLAN/802.11
    • WiFi 4
  • 2.4 GHz ISM applications
    • Bluetooth®
    • ZigBee®
  • U-NII and ISM applications
  • Internet of Things (IoT) devices
  • Smart Home networking
  • Sensing and remote monitoring

Tagged With: 2.4 GHz, Bluetooth, ISM, IoT, SMA, U.FL, Wifi Antenna, WLAN Antenna, antenna wifi, wifi 4 antenna, 802.11 antenna, 802.11bg antenna, 802.11n antenna, 802.11ac antenna, 802.11ax antenna, C-V2V, ipex, mhf, C-V2X, vehicle to everything, vehicle to vehicle, C-V2I, vehicle to infrastructure, C-V2N, vehicle to network, ufl, sma connector, pin, male pin, brass, gold, DSRC, MHF-1, MHF-4, MHF4, UNII, ITS, magnetic, magnetic mount

ANT-2.4-FPC-SF 2.4 GHZ Antenna

The Linx ANT-2.4-FPC-SF series antennas are 25 mm x 20 mm adhesive flexible printed circuit (FPC) antennas for 2.4 GHz ISM applications including Bluetooth® and ZigBee®, as well as single-band WiFi.

The ANT-2.4-FPC-SF antennas provide a ground plane independent dipole internal/embedded antenna solution. The flexibility and adhesive backing makes the ANT-2.4-FPC-SF series easy to mount in RF transparent (e.g. plastic) enclosures, enabling environmental sealing and for protection from antenna damage.

Connection is made to the radio via a coaxial cable terminated in an MHF1/U.FL-type plug (female socket), or MHF4 plug (female socket) connector.

Features

  • Performance at 2.4 GHz to 2.5 GHz
    • VSWR: ≤ 1.9
    • Peak Gain: 3.9 dBi
    • Efficiency: 64%
  • Ground plane independent dipole antenna
  • Compact, low-profile
    • 25.4 mm x 20.1 mm x 0.1 mm
  • Adhesive backing permanently adheres to non-metal enclosures using 3M 467MP™/200MP adhesive
  • Flexible to fit in challenging enclosures

Applications

  • 2.4 GHz ISM
    • Bluetooth®
    • ZigBee®
  • Single-band WiFi/802.11
  • Sensing and remote monitoring
  • Hand-held devices
  • Internet of Things (IoT) devices

Tagged With: 2.4 GHz, Bluetooth, ISM, IoT, SMA, U.FL, Wifi Antenna, WLAN Antenna, antenna wifi, wifi 4 antenna, 802.11 antenna, 802.11bg antenna, 802.11n antenna, 802.11ac antenna, 802.11ax antenna, C-V2V, ipex, mhf, C-V2X, vehicle to everything, vehicle to vehicle, C-V2I, vehicle to infrastructure, C-V2N, vehicle to network, ufl, sma connector, pin, male pin, brass, gold, DSRC, MHF-1, MHF-4, MHF4, UNII, ITS

Next Page »

Products

  • Antennas
  • Connectors
  • RF Modules
  • GPS & GNSS Modules
  • Wireless Remotes

Support

  • Get Support
  • Application Notes
  • FAQ
  • Software & Drivers
  • Blog
  • Notices
  • Quality & Environment

About Us

  • About Linx
  • Management Team
  • Press Releases
  • Privacy Policy
  • Terms of Use
  • Terms & Conditions
  • Terms & Conditions of Purchase

Contact Us

  • Contact Us
  • Get a Quote
  • Distributor Network
  • Manufacturer’s Rep Network
  • Employment
  • Brands & Trademarks

Linx Technologies

159 Ort Lane
Merlin, OR, US 97532
Toll Free: 1-800-736-6677
Intl: 1-541-471-6256
Fax: 1-541-471-6251
contact@linxtechnologies.com
  • LinkedIn

Copyright © 2023 Linx Technologies

Manage Cookie Consent

The Linx Technologies website uses cookies for essential services and an improved user experience. By using our website, you consent to our Privacy Policy and Terms of Use.

Functional cookies Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes. The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
Manage options Manage services Manage vendors Read more about these purposes
View preferences
{title} {title} {title}