Linx Technologies
  • Home
  • AntennasToggle Dropdown
    • Cellular
    • NB-IoT and LTE-M
    • Sub 1 GHz ISM and LoRaWAN®
    • 2.4 GHz (Bluetooth, Zigbee, Thread)
    • WiFi/WLAN (2.4 GHz, 5 GHz, 6 GHz)
    • GPS/GNSS
    • Evaluation Kits
  • ConnectorsToggle Dropdown
    • RF Connectors
    • RF Adapters
    • Cable Assemblies
    • Battery Holders
    • Lightning Arresters
  • Modules & RemotesToggle Dropdown
    • Wireless Remotes
    • Wireless UART RF Modules
    • Remote Control RF Modules
    • Transparent RF Modules
    • GPS & GNSS Modules
    • Remote Control Integrated Circuits
    • Interface Modules
    • RF Module Evaluation & Development Kits
    • End of Life RF Modules & Development Kits
  • Contact UsToggle Dropdown
    • Ask a Question
    • Employment
    • Distributor Network
    • Manufacturer’s Rep Network
    • Press
  • AboutToggle Dropdown
    • About Linx
    • Management Team
    • Privacy Policy
    • Terms of Use
    • Terms and Conditions

microSplatch® uSP410 915 MHz Antenna

The microSplatch® uSP410 915 MHz antenna is a surface-mount monopole antenna for embedded Sub-1 GHz and low-power, wide-area (LPWA) applications including LoRaWAN®, remote controls, and ISM band applications in the 902 MHz to 930 MHz band.

uSP410 series monopole antennas use a grounded-line technique to achieve outstanding performance in a compact surface-mount package. The uSP410 series exhibits low proximity effect, making it a good embedded antenna choice for devices typically subject to nearby interference.

uSP410 series antennas are available in tape and reel packaging and are designed for reflow-solder mounting directly to a printed circuit board for high-volume applications.

Features

  • Performance at 902 MHz to 930 MHz
    • VSWR: ≤ 2.9
    • Peak Gain: 0.9 dBi
    • Efficiency: 27%
  • Omnidirectional radiation pattern
  • Compact package
    • 13.2 mm x 9.1 mm x 2.9 mm
  • Direct surface-mount PCB attachment
  • Reflow- or hand-solder assembly
  • Resistant to proximity effect from nearby interferers
  • Excellent performance with small ground plane (38 mm x 84 mm)

Applications

  • Low-power, wide-area (LPWA) applications
    • LoRaWAN®
    • Sigfox®
    • WiFi HaLow™
  • Remote sensing, monitoring and control
    • Security systems
    • Industrial Machinery
  • Internet of Things (IoT) devices
  • ISM applications
  • Smart Home networking
  • Hand-held devices

 

Tagged With: Chip Antenna, Embedded Antenna, Tape and Reel, Monopole, ISM, 915 MHz, LoRa, LoRaWAN, Sigfox, LPWA, omnidirectional, 902 MHz, 928 MHz, 930 MHz, sub-1 GHz antenna, low power wide area, halow, surface mount antenna, PCB antenna, 1/4 wave, proximity effect, tiny antenna, microsplatch, splatch, tape & reel, virtual antenna

microSplatch® uSP410 868 MHz Antenna

The microSplatch™ uSP410 868 MHz antenna is a surface-mount monopole antenna for embedded Sub-1 GHz and low-power, wide-area (LPWA) applications including LoRaWAN®, SigFox®, remote controls, and ISM applications in the 862 MHz to 876 MHz range.

uSP410 series monopole antennas use a grounded-line technique to achieve outstanding performance in a compact surface-mount package. The uSP410 series exhibits low proximity effect, making it a good embedded antenna choice for devices typically subject to nearby interferers.

uSP410 series antennas are available in tape and reel packaging and are designed for reflow-solder mounting directly to a printed circuit board for high-volume applications.

Features

  • Performance at 862 MHz to 876 MHz
    • VSWR ≤ 2.1
  • Omnidirectional radiation pattern
  • Compact package
    • 13.2 mm x 9.1 mm x 2.9 mm
  • Direct surface-mount PCB attachment
  • Reflow- or hand-solder assembly
  • Resistant to proximity effect from nearby interferers
  • Excellent performance with small ground plane (38 mm x 84 mm)

Applications

  • Low-power, wide-area (LPWA) applications
    • LoRaWAN®
    • Sigfox®
    • WiFi HaLow™
  • Remote sensing, monitoring and control
    • Security systems
    • Industrial machinery
  • Internet of Things (IoT) devices
  • ISM applications
  • Smart Home networking
  • Hand-held devices
  • Gateways

Tagged With: 868 MHz, Chip Antenna, Embedded Antenna, Tape and Reel, Monopole, ISM, LoRa, LoRaWAN, LPWA, omnidirectional, sub-1 GHz antenna, low power wide area, halow, surface mount antenna, PCB antenna, 1/4 wave, Weightless-p, proximity effect, tiny antenna, microsplatch, splatch, tape & reel, virtual antenna

microSplatch® uSP410 433 MHz Antenna

The microSplatch™ uSP410 433 MHz antenna is a surface-mount monopole antenna for embedded Sub-1 GHz and low-power, wide-area (LPWA) applications including LoRaWAN®, and remote control applications.

uSP410 series monopole antennas use a grounded-line technique to achieve outstanding performance in a compact surface-mount package. The uSP410 series exhibits low proximity effect, making it a good embedded antenna choice for devices typically subject to nearby interferers.

uSP410 series antennas are available in tape and reel packaging and are designed for reflow-solder mounting directly to a printed circuit board for high-volume applications.

Features

  • Performance at 430 MHz to 435 MHz
    • VSWR: ≤ 2.2
  • Omnidirectional radiation pattern
  • Compact package
    • 13.2 mm x 9.1 mm x 2.9 mm
  • Direct surface-mount PCB attachment
  • Reflow- or hand-solder assembly
  • Resistant to proximity effect from nearby interferers
  • Excellent performance with small ground plane (38 mm x 84 mm)

Applications

  • Low-power, wide-area (LPWA) applications
    • LoRaWAN®, ITU-T Y.4480
  • Internet of Things (IoT) devices
  • ISM applications
  • Smart Home networking
  • Remote sensing, monitoring and control
    • Security systems
    • Garage/gate openers
    • Weather reporting
    • Vending machines
  • Hand-held devices

Tagged With: Chip Antenna, Embedded Antenna, Tape and Reel, Monopole, ISM, 433 MHz, LoRa, LoRaWAN, LPWA, omnidirectional, sub-1 GHz antenna, low power wide area, halow, surface mount antenna, PCB antenna, 1/4 wave, Weightless-p, proximity effect, tiny antenna, microsplatch, splatch, tape & reel, virtual antenna

SP610 Splatch® Antenna Evaluation Kits

Evaluate SP610 antennas, or prototype designs with the SP610 antenna evaluation kit. Antenna evaluation kits provide the opportunity to benchmark performance against the product datasheet and other offerings. Kits also enable testing of antenna performance under simulated interference conditions and provide a benchmark for comparison with product design prototypes. For even more support, contact Linx Technologies for a design consultation.

Features

    • Compact package (40 mm x 10 mm x 2.8 mm)
    • Excellent performance with small ground plane (102 mm x 45 mm)
  • Mounted Antenna Included
  • Resistant to proximity effect from nearby interferers
  • Omnidirectional radiation pattern
  • Direct surface-mount PCB attachment
  • Reflow- or hand-solder assembly

Applications

  • Cellular IoT: LTE-M (Cat-M1) and NB-IoT
  • Worldwide LTE, UMTS and GSM
  • Low-power, wide-area (LPWA)
  • Smart Home networking
  • Sensing and remote monitoring
  • Internet of Things (IoT) devices

Tagged With: NB-IoT, CAT-M1, antenna, Cellular, LTE, LTE-M, Multi-Band, Surface Mount, Tape and Reel, Monopole, SMD, Multiband, Verizon LTE-M, ATT LTE-M, T-Mobile LTE-M, virtual antenna

SP610 Splatch® Antennas

Linx Technologies’ Splatch® SP610 is a surface-mount monopole antenna for embedded LTE and cellular IoT (LTE-M and NB-IoT) applications. The SP610 specifically supports low-frequency LTE bands from 698 MHz to 960 MHz, notably the 700 MHz bands, and 1710 MHz to 2700 MHz making it an outstanding antenna for LTE and cellular low-power wide-area (LPWA) applications in North America, Europe and worldwide.

The SP610 uses a grounded-line technique to achieve outstanding performance when subject to nearby sources of interference.

It is available in tape and reel packaging and is designed for reflow-solder mounting directly to a printed circuit board for high-volume applications.

 

Features

  • 700 MHz bands: Efficiency 61%, Peak Gain 5.1 dBi, VSWR ≤ 3.4
  • Compact package (40 mm x 10 mm x 2.8 mm)
  • Excellent performance with small ground plane (102 mm x 45 mm)
  • Resistant to proximity effect from nearby interferers
  • Direct surface-mount PCB attachment
  • Reflow- or hand-solder assembly

Applications

  • Cellular IoT: LTE-M (Cat-M1) and NB-IoT
  • Worldwide LTE, UMTS and GSM
  • Low-power, wide-area (LPWA)
  • Smart Home Networking
  • Sensing and remote monitoring
  • Internet of Things (IoT) devices

Selected Carrier and Regional Performance

Carrier/RegionLTE BandsMaximum VSWR
AT&T, T-Mobile (North America)2, 4, 5, 12, 14, 17, 29, 30, 663.4
Verizon (North America)2, 4, 5, 13, 663.4
Sprint (North America)25, 263.4
Europe, Latin America1, 3, 8, 20, 283.4
 

Tagged With: NB-IoT, CAT-M1, Cellular, LTE, LTE-M, Multi-Band, Surface Mount, Tape and Reel, Monopole, SMD, Multiband, Verizon LTE-M, ATT LTE-M, T-Mobile LTE-M, virtual antenna

nSP250 nanoSplatch® Antennas

The nanoSplatch® nSP250 is a surface-mount antenna for embedded WiFi/WLAN and other 2.4 GHz or 5 GHz ISM or U-NII frequency band applications. It uses a grounded-line technique to achieve outstanding performance in a tiny surface-mount package. The nSP250 exhibits low proximity effect with a very hemispherical radiation pattern, making it ideal for handheld devices and applications typically subject to interference.
 
The nSP250 is available in tape and reel packaging and is designed for reflow-solder mounting directly to a printed circuit board for high-volume applications.

Features

  • Performance at 2.4 GHz to 2.485 GHz
    • VSWR: ≤ 2.0
    • Peak Gain: 2.7 dBi
    • Efficiency: 65%
  • Performance at 5.725 GHz to 5.875 GHz
    • VSWR: ≤ 2.4
    • Peak Gain: 3.7 dBi
    • Efficiency: 70%
  • Ultra-compact package (9.6 mm x 8.4 mm x 1.1 mm)
  • Excellent performance with smallest ground plane (40 mm x 20 mm)
  • Resistant to proximity effect
  • Omnidirectional radiation pattern
  • Direct surface-mount PCB attachment
  • Reflow- or hand-solder assembly
  • High gain (2.7 dBi at 2.4 GHz, 3.7 dBi at 5.8 GHz)
  • High efficiency (66% at 2.4 GHz, 69% at 5.8 GHz)

Applications

  • Single- and dual-band WiFi/WLAN/802.11
    • WiFi 6 (802.11ax)
    • WiFi 5 (802.11ac)
    • WiFi 4 (802.11n)
  • Bluetooth® and ZigBee®
  • Smart Home networking
  • Sensing and remote monitoring
  • Hand-held devices
  • Internet of Things (IoT) devices
  • U-NII and ISM applications

 

Tagged With: antenna, Surface Mount, Tape and Reel, SMD, single-band, dual-band, single-band WiFi, dual-band WiFi, single-band WLAN, dual-band WLAN, Bluetooth, ZigBee, Smart Home Networking, U-NII, ISM, IoT, virtual antenna

CER Series Ceramic LTE Chip Antenna

The CER Series ceramic LTE chip antenna is a compact, high-efficiency antenna designed to be easily integrated into wireless telecommunication devices. Operating in all common 4G/3G/2G LTE bands, it has better efficiency and gain at lower cellular bands compared to competitive products, providing enhanced performance for NB-IoT (Narrow Band Internet of Things) and CAT-M1 applications. The CER Series antenna’s new, advanced design saves valuable board space and the integrated solution saves time and money for labor, cable, and connector costs during installation or deployment.

New CAT-M1 and NB-IoT standards are poised to take industrial wireless applications to a new level and Linx has designed new antennas to support these innovations. The CER series ceramic LTE chip antenna supports both wide-band LTE antennas and optimized antenna solutions for CAT-M1 and NB-IoT suitable for a wide array of applications.

If you’d like to contact us about the CER Series Ceramic LTE Chip Antenna, contact sales@linxtechnologies.com

Tagged With: NB-IoT, CAT-M1, embedded, antenna, Cellular, LTE, LTE-M, Multi-Band, Surface Mount, Tape and Reel, Monopole, virtual antenna

CHP Series Ceramic Chip Antennas

The tiny CHP Series is available at 868 MHz, 916 MHz or 2.45 GHz. Its small size and surface-mount package make it easy to hide inside a product case. Ceramic construction lets the antenna withstand reflow oven temperatures up to 260° C.

  • Versatile: wide bandwidth at 2.45 GHz is suitable for Bluetooth, 802.11, ZigBee® and other RF standards
  • Unobtrusive: tiny package is easy to hide inside a product case
  • Reflow compatible: withstands oven temperatures up to 260° C

Tagged With: virtual antenna

SP Series Splatch® Antennas

The embedded SP Series Splatch® is great for remote controls, pagers and other compact devices. It’s available at 315 MHz, 403 MHz, 418 MHz, 433 MHz, 458 MHz, 868 MHz and 916 MHz. The antenna’s affordable price and reflow-compatible package make it an excellent choice for cost-sensitive applications.

  • Compact: fits inside remote controls, pagers and other handheld devices
  • Affordable: priced for cost-sensitive applications
  • Reflow compatible: withstands oven temperatures up to 260° C

Tagged With: virtual antenna

uSP Series microSplatch® Antennas

microSplatch® embedded antennas are designed for very compact applications requiring an internal, surface-mount antenna solution, such as Bluetooth® and ZigBee® devices, remote controls and pagers. The microSplatch antenna available in the 403 MHz, 418 MHz, 433 MHz*, 868 MHz*, 916 MHz* and 2.4 GHz bands. The antenna’s affordable price and reflow-compatible package makes it an excellent choice for cost-sensitive applications.

 

  • Compact: fits inside remote controls, pagers and other handheld devices
  • Affordable: priced for cost-sensitive applications
  • Reflow compatible: withstands oven temperatures up to 260 °C

The 433 MHz, 868 MHz and 916 MHz antennas are not recommended for new designs. See the updated microSplatch uSP410 offerings.

Tagged With: virtual antenna

Products

  • Antennas
  • Connectors
  • RF Modules
  • GPS & GNSS Modules
  • Wireless Remotes

Support

  • Get Support
  • Application Notes
  • FAQ
  • Software & Drivers
  • Blog
  • Notices
  • Quality & Environment

About Us

  • About Linx
  • Management Team
  • Press Releases
  • Brands & Trademarks
  • Privacy Policy
  • Terms of Use
  • Terms & Conditions

Contact Us

  • Contact Us
  • Get a Quote
  • Distributor Network
  • Manufacturer’s Rep Network
  • Employment

Linx Technologies

159 Ort Lane
Merlin, OR, US 97532
Toll Free: 1-800-736-6677
Intl: 1-541-471-6256
Fax: 1-541-471-6251
contact@linxtechnologies.com
  • LinkedIn

Copyright © 2022 Linx Technologies · Log in

Manage Cookie Consent

The Linx Technologies website uses cookies for essential services and an improved user experience. By using our website, you consent to our Privacy Policy and Terms of Use.

Functional cookies Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes. The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
Manage options Manage services Manage vendors Read more about these purposes
View preferences
{title} {title} {title}