Linx Technologies
  • AntennasToggle Dropdown
    • Cellular
    • NB-IoT and LTE-M
    • Sub 1 GHz ISM and LoRaWAN®
    • 2.4 GHz (Bluetooth, Zigbee, Thread)
    • WiFi/WLAN (2.4 GHz, 5 GHz, 6 GHz)
    • GPS/GNSS
    • Evaluation Kits
  • ConnectorsToggle Dropdown
    • RF Connectors
    • RF Adapters
    • Cable Assemblies
    • Battery Holders
    • Lightning Arresters
  • Modules & RemotesToggle Dropdown
    • Wireless Remotes
    • Wireless UART RF Modules
    • Remote Control RF Modules
    • Transparent RF Modules
    • GPS & GNSS Modules
    • Remote Control Integrated Circuits
    • Interface Modules
    • RF Module Evaluation & Development Kits
    • End of Life RF Modules & Development Kits
  • Contact UsToggle Dropdown
    • Ask a Question
    • Employment
    • Distributor Network
    • Manufacturer’s Rep Network
    • Press
  • AboutToggle Dropdown
    • About Linx
    • Management Team
    • Privacy Policy
    • Terms of Use
    • Terms and Conditions

ANT-W63-SPNF1 WiFi 7 Antenna

The ANT-W63-SPNF1 is a dipole, panel mount antenna for WiFi 6/WiFi 6E applications in the 2.4 GHz, 5 GHz and 6 GHz bands.

The ANT-W63-SPNF1 provides a ground plane independent dipole antenna solution which mounts permanently to metallic and non-metallic surfaces using the integrated N jack (female socket) connector while enabling an environmentally sealed enclosure and protection from tampering.

Features

  • Performance at 2.4 GHz to 2.5 GHz
    • VSWR: ≤ 1.4
    • Peak Gain: 4.5 dBi
    • Efficiency: 89%
  • Performance at 5.150 GHz to 7.125 GHz
    • VSWR: ≤ 2.0
    • Peak Gain: 7.2 dBi
    • Efficiency: 85%
  • Ground plane independent dipole antenna
  • N jack (female socket)
  • External mount, includes all hardware for installation including 5/8”-24UNEF hex nut, washer and gasket
  • IP-67 ratable
  • Impact resistant UV stabilized ABS radome material

Applications

  • WiFi/WLAN coverage
    • WiFi 6E (802.11ax)
    • WiFi 6 (802.11ax)
    • WiFi 5 (802.11ac)
    • WiFi 4 (802.11n)
    • 802.11b/g
  • 2.4 GHz ISM applications
    • Bluetooth®
    • ZigBee®
  • U-NII bands 1-8
  • Internet of Things (IoT) devices
  • Smart Home networking
  • Sensing and remote monitoring

Tagged With: Wifi Antenna, Dual-band Wifi Antenna, WLAN Antenna, wifi 6 antenna, wifi 6e antenna, 5ghz wifi antenna, 6ghz wifi antenna, antenna wifi, wifi 4 antenna, wifi 5 antenna, 802.11 antenna, 802.11bg antenna, 802.11n antenna, 802.11ac antenna, 802.11ax antenna, adhesive wifi antenna, embedded wifi antenna, C-V2V, C-V2X, vehicle to everything, vehicle to vehicle, C-V2I, vehicle to infrastructure, C-V2N, vehicle to network, V2X, LTE band 46, LTE band 47, 5.9 GHz, 802.11be

ANT-W63-FPC-LV WiFi Antenna

The Linx ANT-W63-FPC-LV series antennas are 45 mm x 7 mm adhesive flexible printed circuit (FPC) antennas for WiFi 6/WiFi 6E applications in the 2.4 GHz, 5 GHz and 6 GHz bands.

The ANT-W63-FPC-LV antennas provide a ground plane independent dipole internal/embedded antenna solution. The flexibility and adhesive backing makes the ANT-W63-FPC-LV series easy to mount in RF transparent (e.g. plastic) enclosures, enabling environmental sealing and for protection from antenna damage.

Connection is made to the radio via a coaxial cable terminated in an MHF1/U.FL-type plug (female socket), or MHF4 plug (female socket) connector.

Features

  • Performance at 2.4 GHz to 2.5 GHz
    • VSWR: ≤ 1.5
    • Peak Gain: 4.8 dBi
    • Efficiency: 79%
  • Performance at 5.950 GHz to 7.125 GHz
    • VSWR: ≤ 1.5
    • Peak Gain: 7.4 dBi
    • Efficiency: 77%
  • Ground plane independent dipole antenna
  • Compact, low-profile
    • 45.0 mm x 7.0 mm x 0.1 mm
  • Adhesive backing permanently adheres to non-metal enclosures using 3M 467MP™/200MP adhesive

Applications

  • WiFi/WLAN coverage
    • WiFi 6E (802.11ax)
    • WiFi 6 (802.11ax)
    • WiFi 5 (802.11ac)
    • WiFi 4 (802.11n)
    • 802.11b/g
  • 2.4 GHz ISM applications
    • Bluetooth®
    • ZigBee®
  • U-NII bands 1-8
  • Internet of Things (IoT) devices
  • Smart Home networking
  • Sensing and remote monitoring

Tagged With: embedded, Wifi Antenna, WLAN Antenna, wifi 6 antenna, wifi 6e antenna, 5ghz wifi antenna, 6ghz wifi antenna, antenna wifi, wifi 4 antenna, wifi 5 antenna, 802.11 antenna, 802.11bg antenna, 802.11n antenna, 802.11ac antenna, 802.11ax antenna, adhesive wifi antenna, embedded wifi antenna, C-V2V, C-V2X, vehicle to everything, vehicle to vehicle, C-V2I, vehicle to infrastructure, C-V2N, vehicle to network, adhesive, flexoble

ANT-W63-FPC-SAH WiFi Antenna

The Linx ANT-W63-FPC-SAH series antennas are 12 mm x 12 mm adhesive flexible printed circuit (FPC) antennas for WiFi 6/WiFi 6E applications in the 2.4 GHz, 5 GHz and 6 GHz bands.

The ANT-W63-FPC-SAH antennas provide a ground plane independent dipole internal/embedded antenna solution. The flexibility and adhesive backing make the ANT-W63-FPC-SAH series easy to mount in RF transparent (e.g. plastic) enclosures, enabling environmental sealing and for protection from antenna damage.

Connection is made to the radio via a coaxial cable terminated in an MHF1/U.FL-type plug (female socket), or MHF4 plug (female socket) connector.

Features

  • Performance at 5.150 GHz to 5.895 GHz
    • VSWR: ≤ 3.4
    • Peak Gain: 7.2 dBi
    • Efficiency: 64%
  • Performance at 5.950 GHz to 7.125 GHz
    • VSWR: ≤ 2.4
    • Peak Gain: 6.3 dBi
    • Efficiency: 53%
  • Ground plane independent dipole antenna
  • Compact, low-profile
    • 12.4 mm x 12.0 mm x 0.1 mm
  • Adhesive backing permanently adheres to non-metal enclosures using 3M 467MP™/200MP adhesive
  • Flexible to fit in challenging enclosures

Applications

  • WiFi/WLAN coverage
    • WiFi 6E (802.11ax)
    • WiFi 6 (802.11ax)
    • WiFi 5 (802.11ac)
    • WiFi 4 (802.11n)
    • 802.11b/g
  • 2.4 GHz ISM applications
    • Bluetooth®
    • ZigBee®
  • U-NII bands 1-8
  • Internet of Things (IoT) devices
  • Smart Home networking
  • Sensing and remote monitoring

Tagged With: embedded, Wifi Antenna, WLAN Antenna, wifi 6 antenna, wifi 6e antenna, 5ghz wifi antenna, 6ghz wifi antenna, antenna wifi, wifi 4 antenna, wifi 5 antenna, 802.11 antenna, 802.11bg antenna, 802.11n antenna, 802.11ac antenna, 802.11ax antenna, adhesive wifi antenna, embedded wifi antenna, C-V2V, C-V2X, vehicle to everything, vehicle to vehicle, C-V2I, vehicle to infrastructure, C-V2N, vehicle to network, adhesive, flexoble

ANT-W63-FPC-SH WiFi Antenna

The Linx ANT-W63-FPC-SH series antennas are 25 mm x 20 mm adhesive flexible printed circuit (FPC) antennas for WiFi 6/WiFi 6E applications in the 2.4 GHz, 5 GHz and 6 GHz bands.

The ANT-W63-FPC-SH antennas provide a ground plane independent dipole internal/embedded antenna solution. The flexibility and adhesive backing make the ANT-W63-FPC-SH series easy to mount in RF transparent (e.g. plastic) enclosures, enabling environmental sealing and for protection from antenna damage.

Connection is made to the radio via a coaxial cable terminated in an MHF1/U.FL-type plug (female socket), or MHF4 plug (female socket) connector.

Features

  • Performance at 2.4 GHz to 2.5 GHz
    • VSWR: ≤ 1.8
    • Peak Gain: 5.5 dBi
    • Efficiency: 85%
  • Performance at 5.950 GHz to 7.125 GHz
    • VSWR: ≤ 1.5
    • Peak Gain: 7.8 dBi
    • Efficiency: 76%
  • Ground plane independent dipole antenna
  • Compact, low-profile
    • 25.3 mm x 20.3 mm x 0.1 mm
  • Adhesive backing permanently adheres to non-metal enclosures using 3M 467MP™/200MP adhesive
  • Flexible to fit in challenging enclosures

Applications

  • WiFi/WLAN coverage
    • WiFi 6E (802.11ax)
    • WiFi 6 (802.11ax)
    • WiFi 5 (802.11ac)
    • WiFi 4 (802.11n)
    • 802.11b/g
  • 2.4 GHz ISM applications
    • Bluetooth®
    • ZigBee®
  • U-NII bands 1-8
  • Internet of Things (IoT) devices
  • Smart Home networking
  • Sensing and remote monitoring

Tagged With: embedded, Wifi Antenna, WLAN Antenna, wifi 6 antenna, wifi 6e antenna, 5ghz wifi antenna, 6ghz wifi antenna, antenna wifi, wifi 4 antenna, wifi 5 antenna, 802.11 antenna, 802.11bg antenna, 802.11n antenna, 802.11ac antenna, 802.11ax antenna, adhesive wifi antenna, embedded wifi antenna, C-V2V, C-V2X, vehicle to everything, vehicle to vehicle, C-V2I, vehicle to infrastructure, C-V2N, vehicle to network, adhesive, flexoble

ANT-W63-FPC-LH WiFi Antenna

The Linx ANT-W63-FPC-LH series antennas are 45 mm x 7 mm adhesive flexible printed circuit (FPC) antennas for WiFi 6/WiFi 6E applications in the 2.4 GHz, 5 GHz and 6 GHz bands.

The ANT-W63-FPC-LH antennas provide a ground plane independent dipole internal/embedded antenna solution. The flexibility and adhesive backing make the ANT-W63-FPC-LH series easy to mount in RF transparent (e.g. plastic) enclosures, enabling environmental sealing and for protection from antenna damage.

Connection is made to the radio via a coaxial cable terminated in an MHF1/U.FL-type plug (female socket), or MHF4 plug (female socket) connector.

Features

  • Performance at 2.4 GHz to 2.5 GHz
    • VSWR: ≤ 1.4
    • Peak Gain: 4.5 dBi
    • Efficiency: 90%
  • Performance at 5.950 GHz to 7.125 GHz
    • VSWR: ≤ 1.8
    • Peak Gain: 10.1 dBi
    • Efficiency: 78%
  • Ground plane independent dipole antenna
  • Compact, low-profile
    • 45.0 mm x 7.0 mm x 0.1 mm
  • Adhesive backing permanently adheres to non-metal enclosures using 3M 467MP™/200MP adhesive
  • Flexible to fit in challenging enclosures

Applications

  • WiFi/WLAN coverage
    • WiFi 6E (802.11ax)
    • WiFi 6 (802.11ax)
    • WiFi 5 (802.11ac)
    • WiFi 4 (802.11n)
    • 802.11b/g
  • 2.4 GHz ISM applications
    • Bluetooth®
    • ZigBee®
  • U-NII bands 1-8
  • Internet of Things (IoT) devices
  • Smart Home networking
  • Sensing and remote monitoring

Tagged With: embedded, Wifi Antenna, WLAN Antenna, wifi 6 antenna, wifi 6e antenna, 5ghz wifi antenna, 6ghz wifi antenna, antenna wifi, wifi 4 antenna, wifi 5 antenna, 802.11 antenna, 802.11bg antenna, 802.11n antenna, 802.11ac antenna, 802.11ax antenna, adhesive wifi antenna, embedded wifi antenna, C-V2V, C-V2X, vehicle to everything, vehicle to vehicle, C-V2I, vehicle to infrastructure, C-V2N, vehicle to network, adhesive, flexoble

ANT-W63-MSA-TH1 WiFi 6E Antenna

The ANT-W63-MSA-TH1 is a stamped metal antenna designed for superior performance in WiFi 6/WiFi 6E applications in the 2.4 GHz, 5 GHz and 6 GHz bands.

The ANT-W63-MSA-TH1 antenna exhibits excellent performance in a compact size (15 mm x 17 mm x 10 mm). It is packaged in trays and is designed for through-hole mounting directly to a printed circuit board.

Features

  • Performance at 5.150 GHz to 5.895 GHz
    • VSWR: ≤ 1.9
    • Peak Gain: 3.8 dBi
    • Efficiency: 61%
  • Performance at 5.950 GHz to 7.125 GHz
    • VSWR: ≤ 3.2
    • Peak Gain: 3.8 dBi
    • Efficiency: 55%
  • Compact, low-profile
    • 15.0 mm x 17.2 mm x 9.8 mm
  • Omnidirectional radiation pattern
  • Reflow- or hand-solder assembly

Applications

  • WiFi/WLAN coverage
    • WiFi 6E (802.11ax)
    • WiFi 6 (802.11ax)
    • WiFi 5 (802.11ac)
    • WiFi 4 (802.11n)
    • 802.11b/g
  • 2.4 GHz ISM applications
    • Bluetooth®, ZigBee®
  • U-NII bands 1-8
  • Internet of Things (IoT) devices
  • Smart Home networking
  • Sensing and remote monitoring

Tagged With: embedded, Wifi Antenna, WLAN Antenna, wifi 6 antenna, wifi 6e antenna, 5ghz wifi antenna, 6ghz wifi antenna, antenna wifi, wifi 4 antenna, wifi 5 antenna, 802.11 antenna, 802.11bg antenna, 802.11n antenna, 802.11ac antenna, 802.11ax antenna, adhesive wifi antenna, embedded wifi antenna, C-V2V, C-V2X, vehicle to everything, vehicle to vehicle, C-V2I, vehicle to infrastructure, C-V2N, vehicle to network, solder, through-hole

Dual-Band WiFi Dome Antenna

The ANT-DB1-WRT is a low-profile, panel-mount dipole antenna designed for superior performance in the 2.4 GHz, 5 GHz and 6 GHz bands supporting both WiFi 6 and WiFi 6E.

The ANT-DB1-WRT antenna’s compact size allows it to be mounted in applications requiring a low profile and external antenna performance, such as WiFi/WLAN applications indoors and outdoors.

The ANT-DB1-WRT antenna is designed with an integrated counterpoise that eliminates the need for additional ground plane in the product, making it ideal for applications with non-conductive or RF-transparent enclosures.

Connector options for the ANT-DB1-WRT antenna are: SMA plug (male pin), RP-SMA plug (female socket), MHF1/ U.FL-type plug (female socket), MHF3-type plug (female socket) or MHF4-type plug (female socket).

Features

  • Performance at 2.4 GHz to 2.485 GHz
    • VSWR: ≤ 1.9
    • Peak Gain: 3.2 dBi
    • Efficiency: 48%
  • Performance at 5.150 GHz to 5.850 GHz
    • VSWR: ≤ 3.7
    • Peak Gain: 6.8 dBi
    • Efficiency: 57%
  • Low-profile
    • Height: 10.0 mm (0.40 in)
  • Mounts permanently with pressure sensitive adhesive ring and provided nut

Applications

  • WiFi/WLAN coverage
    • WiFi 6E (802.11ax)
    • WiFi 6 (802.11ax)
    • WiFi 5 (802.11ac)
    • WiFi 4 (802.11n)
    • 802.11b/g
  • 2.4 GHz ISM applications
    • Bluetooth®, ZigBee®
  • U-NII bands 1-8
  • Internet of Things (IoT) devices
  • Smart Home networking
    • Sensing and remote monitoring
    • Wireless vending

Tagged With: Bluetooth, ISM, IoT, SMA, U.FL, Wifi Antenna, Dual-band Wifi Antenna, WLAN Antenna, wifi 6 antenna, wifi 6e antenna, antenna wifi, wifi 4 antenna, wifi 5 antenna, 802.11 antenna, 802.11bg antenna, 802.11n antenna, 802.11ac antenna, 802.11ax antenna, C-V2V, ipex, mhf, C-V2X, vehicle to everything, vehicle to vehicle, C-V2I, vehicle to infrastructure, C-V2N, vehicle to network, ufl, 5 ghz wifi antenna, 6 ghz wifi antenna, sma connector, pin, male pin, brass, gold, DSRC, MHF-1, MHF-4, MHF4, UNII, ITS

W63WS4 External WiFi 6 Antenna

The Linx ANT-W63WS4 is a dipole, blade-style antenna for WiFi 6/WiFi 6E applications in the 2.4 GHz, 5 GHz and 6 GHz bands.

The hinged design allows for the antenna to be positioned for optimum performance and reduces the potential for damage from impact compared to a fixed whip design. The antenna connects via an SMA plug (male pin) or RP-SMA plug (female socket) connector.

Features

  • Performance at 2.4 GHz to 2.5 GHz
    • VSWR: ≤ 1.2
    • Peak Gain: 2.6 dBi
    • Efficiency: 80%
  • Performance at 5.150 GHz to 7.125 GHz
    • VSWR: ≤ 1.8
    • Peak Gain: 5.5 dBi
    • Efficiency: 74%
  • Rugged ABS construction
  • Hinged design with detents for straight, 45 degree and 90 degree positioning
  • SMA plug (male pin) or RP-SMA plug (female socket) connector

Applications

  • WiFi/WLAN coverage
    • WiFi 6E (802.11ax)
    • WiFi 6 (802.11ax)
    • WiFi 5 (802.11ac)
    • WiFi 4 (802.11n)
    • 802.11b/g
  • 2.4 GHz ISM applications
    • Bluetooth®
    • ZigBee®
  • U-NII bands 1-8
  • Internet of Things (IoT) devices
  • Smart Home networking
  • Sensing and remote monitoring

Tagged With: 2.4GHz Antenna, Bluetooth Antenna, Zigbee Antenna, Swivel Antenna, Wifi Antenna, Dual-band Wifi Antenna, WLAN Antenna, wifi 6 antenna, wifi 6e antenna, 5ghz wifi antenna, 6ghz wifi antenna, antenna wifi, wifi 4 antenna, wifi 5 antenna, 802.11 antenna, 802.11bg antenna, 802.11n antenna, 802.11ac antenna, 802.11ax antenna, C-V2V, C-V2X, vehicle to everything, vehicle to vehicle, C-V2I, vehicle to infrastructure, C-V2N, vehicle to network, V2X, LTE band 46, LTE band 47, 5.9 GHz, 802.11be, Hinged antenna, Tilt/swivel antenna, Tilt antenna, Compact antenna, SMA antenna, RP-SMA antenna, Dual-band wi-fi antenna, Wi-fi antenna, Wifi 7ghz antenna, Bluetooth whip antenna, Compact Bluetooth antenna, 802.15.4 antenna, Dipole antenna, Blade antenna, WiFi7

W63-WRT WiFi 6 Antenna

The Linx ANT-W63-WRT-ccc is a low-profile, panel-mount dipole antenna designed for superior performance in WiFi 6/WiFi 6E applications in the 2.4 GHz, 5 GHz and 6 GHz bands.

The ANT-W63-WRT antenna’s compact size allows it to be mounted in applications requiring a low profile and external antenna performance, such as WiFi/WLAN applications indoors and outdoors.

The ANT-W63-WRT antenna is designed with an integrated counterpoise that eliminates the need for additional ground plane in the product, making it ideal for applications with non-conductive or RF-transparent enclosures.

Connector options for the ANT-W63-WRT antenna are: SMA plug (male pin), RP-SMA plug (female socket), MHF1/ U.FL-type plug (female socket) or MHF4-type plug (female socket).

Features

  • Performance at 5.15 GHz to 5.85 GHz
    • VSWR: ≤ 1.4
    • Peak Gain: 4.5 dBi
    • Efficiency: 84%
  • Performance at 5.925 GHz to 7.125 GHz
    • VSWR: ≤ 2.2
    • Peak Gain: 6.4 dBi
    • Efficiency: 62%
  • Low-profile
    • Mounted height: 27.0 mm (1.10 in)
  • Ground Plane independent

Applications

  • WiFi/WLAN coverage
    • WiFi 6E (802.11ax)
    • WiFi 6 (802.11ax)
    • WiFi 5 (802.11ac)
    • WiFi 4 (802.11n)
    • 802.11b/g
  • 2.4 GHz ISM applications
    • Bluetooth®, ZigBee®
  • U-NII bands 1-8
  • Internet of Things (IoT) devices
  • Smart Home networking
  • Sensing and remote monitoring

Tagged With: SMA, Dipole, Wifi Antenna, Dual-band Wifi Antenna, WLAN Antenna, wifi 6 antenna, wifi 6e antenna, antenna wifi, wifi 4 antenna, wifi 5 antenna, 802.11 antenna, 802.11bg antenna, 802.11n antenna, 802.11ac antenna, 802.11ax antenna, C-V2V, ground plane independent, C-V2X, vehicle to everything, vehicle to vehicle, C-V2I, vehicle to infrastructure, C-V2N, vehicle to network, 5 ghz wifi antenna, 6 ghz wifi antenna, blade, blade-type, sma connector, pin, male pin, brass, gold

W63-IPW2-NP WiFi 6 Antenna

The Linx ANT-W63-IPW2-NP antenna is an outdoor IP67-rated dipole antenna designed for superior performance in the 2.4 GHz, 5 GHz and 6 GHz bands supporting both WiFi 6 and WiFi 6E.

The ANT-W63-IPW2-NP provides a ground plane independent dipole antenna solution which mounts to metallic and non-metallic surfaces. The antenna housing is UV stabilized fiberglass and connects using an N plug (male pin) connector.

Features

  • Performance at 5.15 GHz to 5.85 GHz
    • VSWR: ≤ 1.7
    • Peak Gain: 5.0 dBi
    • Efficiency: 62%
  • Performance at 5.925 GHz to 7.125 GHz
    • VSWR: ≤ 2.8
    • Peak Gain: 5.6 dBi
    • Efficiency: 52%
  • Enhanced heat and chemical resistant
  • UV stabilized fiberglass antenna housing material
  • IP67 rated
  • N plug (male pin) connector

Applications

  • WiFi/WLAN coverage
    • WiFi 6E (802.11ax)
    • WiFi 6 (802.11ax)
    • WiFi 5 (802.11ac)
    • WiFi 4 (802.11n)
    • 802.11b/g
  • 2.4 GHz ISM applications
    • Bluetooth®
    • ZigBee®
  • U-NII bands 1-8
  • Internet of Things (IoT) devices
  • Smart Home networking
  • Sensing and remote monitoring

Tagged With: Wifi Antenna, Dual-band Wifi Antenna, WLAN Antenna, wifi 6 antenna, wifi 6e antenna, 5ghz wifi antenna, 6ghz wifi antenna, antenna wifi, wifi 4 antenna, wifi 5 antenna, 802.11 antenna, 802.11bg antenna, 802.11n antenna, 802.11ac antenna, 802.11ax antenna, adhesive wifi antenna, embedded wifi antenna, C-V2V, C-V2X, vehicle to everything, vehicle to vehicle, C-V2I, vehicle to infrastructure, C-V2N, vehicle to network, V2X, LTE band 46, LTE band 47, 5.9 GHz, 802.11be

Next Page »

Products

  • Antennas
  • Connectors
  • RF Modules
  • GPS & GNSS Modules
  • Wireless Remotes

Support

  • Get Support
  • Application Notes
  • FAQ
  • Software & Drivers
  • Blog
  • Notices
  • Quality & Environment

About Us

  • About Linx
  • Management Team
  • Press Releases
  • Privacy Policy
  • Terms of Use
  • Terms & Conditions
  • Terms & Conditions of Purchase

Contact Us

  • Contact Us
  • Get a Quote
  • Distributor Network
  • Manufacturer’s Rep Network
  • Employment
  • Brands & Trademarks

Linx Technologies

159 Ort Lane
Merlin, OR, US 97532
Toll Free: 1-800-736-6677
Intl: 1-541-471-6256
Fax: 1-541-471-6251
contact@linxtechnologies.com
  • LinkedIn

Copyright © 2023 Linx Technologies

Manage Cookie Consent

The Linx Technologies website uses cookies for essential services and an improved user experience. By using our website, you consent to our Privacy Policy and Terms of Use.

Functional cookies Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes. The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
Manage options Manage services Manage vendors Read more about these purposes
View preferences
{title} {title} {title}